I have been trying to get my Iomega Scsi JAZ drive working under
Linux. The system tries real hard to use the usb-storage driver but
does not quite make it. I have tried this two ways:
1. using the Iomega scsi to usb adapter. and
2. using a Belkin (shuttle) scsi - usb adapter.
Following are some message outputs for the two cases.
The kernel is 99pre7-6.
Anyone have any ideas of what to try or what I may be doing wrong?
Blisster
Attached devices: none
--------OUTPUT OF /proc/bus/usb/devices ----------
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=059b ProdID=0040 Rev= 1.00
S: Manufacturer=Iomega
S: Product=SCSI-to-USB Cable
S: SerialNumber=05
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
-------END ----------
-------KERNEL MESSAGES -------------May 7 13:14:13 tiny kernel: usb.c: USB new device
connect, assigned device number 4
May 7 13:14:13 tiny kernel: Manufacturer: Iomega
May 7 13:14:13 tiny kernel: Product: SCSI-to-USB Cable
May 7 13:14:13 tiny kernel: SerialNumber: 05
May 7 13:14:13 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 1611
May 7 13:14:13 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 1613
May 7 13:14:13 tiny kernel: scsi1 : SCSI emulation for USB Mass Storage devices
May 7 13:14:13 tiny kernel:
May 7 13:14:13 tiny kernel: scsi : 2 hosts.
May 7 13:14:13 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 1648
May 7 13:14:15 tiny kernel: usb-storage: bus_reset() requested but not implemented
May 7 13:14:15 tiny kernel: usb-storage: bus_reset() requested but not implemented
May 7 13:14:15 tiny kernel: usb_control/bulk_msg: timeout
May 7 13:14:20 tiny kernel: usb-storage: host_reset() requested but not implemented
------------END---------------
------OUTPUT OF /proc/bus/usb/devices ---------
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04e6 ProdID=0002 Rev= 1.00
S: Manufacturer=Shuttle Technology Inc.
S: Product=eUSCSI Bridge Ver 1.11
S: SerialNumber=07
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
------Kernel Messages ----------
May 7 11:58:30 tiny kernel: usb.c: registered new driver usb-storage
May 7 11:58:30 tiny kernel: USB Mass Storage support registered.
May 7 13:05:24 tiny kernel: usb.c: USB new device connect, assigned device number 4
May 7 13:05:24 tiny kernel: Manufacturer: Shuttle Technology Inc.
May 7 13:05:24 tiny kernel: Product: eUSCSI Bridge Ver 1.11
May 7 13:05:24 tiny kernel: SerialNumber: 07
May 7 13:05:24 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 970
May 7 13:05:24 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 972
May 7 13:05:24 tiny kernel: scsi0 : SCSI emulation for USB Mass Storage devices
May 7 13:05:24 tiny kernel:
May 7 13:05:24 tiny kernel: scsi : 1 host.
May 7 13:05:24 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 1280
May 7 13:05:26 tiny kernel: usb_control/bulk_msg: timeout
May 7 13:05:27 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 1987
May 7 13:05:29 tiny kernel: usb_control/bulk_msg: timeout
May 7 13:05:30 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 651
May 7 13:05:32 tiny kernel: usb_control/bulk_msg: timeout
May 7 13:05:32 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 1364
May 7 13:05:35 tiny kernel: usb_control/bulk_msg: timeout
May 7 13:05:35 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 28
May 7 13:05:38 tiny kernel: usb_control/bulk_msg: timeout
------END ----------
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
