Just as clarification. The HC is reporting that it can't send the data
to system memory quick enough, kind of like something is eating up all
of the bus bandwidth.
Disk access could do this.
Look for bus bandwidth hogs (which could be the CPU), but not
necessarily CPU hogs.
JE
On Wed, May 17, 2000, Mark McClelland <[EMAIL PROTECTED]> wrote:
> I am running 2.3.99-pre6 here (using the latest ov511 version on my
> site, obviously :)) and I have not had it fail once. I suppose something
> could have pegged your CPU and caused some sort of data overrun
> somewhere. If it stops working in the middle of the night it is probably
> some cron job causing this, such as slocate. This should not happen in
> any case, though. I have seen xawtv die this way when I disconnect and
> reconnect the camera while it is running, which is somewhat similar to
> overloading the CPU and causing xawtv to miss a frame I guess.
>
> I will do some testing tonight to see if I can reproduce this.
>
> Lawrence Glaister wrote:
> >
> > Hi Jerry,
> > I have a webcamIII running (sort of). I had the best luck with the
> > 2.3.99-pre5 release code (I ran the cam for 3 days straight). I am currently
> > trying 2.3.99-pre6 with 2 patches located on http://alpha.dyndns.org/ov511/.
> > With this code, the pictures seem a little better, but xawtv will not stay
> > alive overnight, in the morning I have to nuke xawtv as it is unresponsive
> > to any keyboard/mouse/repaint commands. There is a lot of work occurring on
> > the ov511 driver and I expect it will take a few weeks to settle down. Marks
> > web site listed above is very helpful in getting everything set up and
> > running.
> > I do not get the data_error messages when running xawtv. I do get some of
> > the hmm.. messages, but these seem not to be a problem.
> >
>
> --
> Mark McClelland
> [EMAIL PROTECTED]
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
