I have attached all the files or log sections requested below. I am
willing to try patches, or whatever is needed to get this hub working.
When I first started the system, I had the SanDisk CF reader attached to
the PC USB port. I disconnected that device and connected the
monitor. After the monitor was connected, I attached the CF reader to the
monitor, but I could not mount the device.
Thanks,
Ken Scott
On Mon, 22 May 2000, Dunlap, Randy wrote:
> We've had this report and one (or two) others about
> the LG Electronics Flatron 795FT Plus monitors/USB hubs
> not working correctly (or USB hubs not working at all)
> with Linux-USB.
>
> Is anyone successfully using a monitor + USB hub with
> Linux-USB or do we have a basic flaw somewhere that we
> need to dig into?
>
> Ken:
> >From the Linux USB Guide:<quote>
> How do I report a bug?
>
> In addition to the information required in
> /usr/src/linux/REPORTING-BUGS, it also helps enormously if you
> provide the output of /proc/bus/usb/devices. If you are
> having problems with your host controller being
> recognised, it helps to have the output of lspci -v.
> If it is supposed to be UHCI, it helps to know whether
> interrupts are being generated every second.
> </quote>
>
> So please include your linux/.config file (CONFIG_USB_xxx will do),
> /proc/bus/usb/{drivers,devices}, and kernel logs at the time
> that you connect the monitor-hub to your PC's USB port or to
> an upstream hub's port.
>
> Thanks,
> ~Randy
>
> > -----Original Message-----
> > From: Ken Scott [mailto:[EMAIL PROTECTED]]
> > Sent: Monday, May 22, 2000 10:14 AM
> > To: [EMAIL PROTECTED]
> > Subject: [linux-usb] Monitor with embedded hub
> >
> >
> > Hello,
> >
> > I have a CTX 19" monitor (model VL-950) with an embedded
> > 4-port hub. The
> > current usb code does not recognize the hub, and the hub does
> > not function
> > (with several kernels, up to 2.3.99-pre6).
> >
> > What do I need to do/provide to get the hub in this monitor
> > working? I am
> > new to device drivers and kernel development, but I can
> > follow the steps
> > to deliver a log file, or something similar to that.
> >
> > Thanks,
> > Ken
> >
> > --
> > ><> Ken Scott [EMAIL PROTECTED] http://www.pcisys.net/~kscott
>
--
><> Ken Scott [EMAIL PROTECTED] http://www.pcisys.net/~kscott
This is the day that the Lord has made;
I will rejoice and be glad in it! -- Psalm 118:24
[1.] One line summary of the problem:
Hub on CTX VL-950S is not enabled
[2.] Full description of the problem/report:
When I plug in the hub in my monitor to the PC USB port, I see messages for adding the
hub, but any devices plugged into the hub are not seen.
[3.] Keywords (i.e., modules, networking, kernel):
USB hub monitor
[4.] Kernel version (from /proc/version):
Linux version 2.3.99-pre6 (root@neon) (gcc version egcs-2.91.66 19990314/Linux
(egcs-1.1.2 release)) #1 Tue May 2 23:44:27 MDT 2000
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
N/A
[6.] A small shell script or example program which triggers the
problem (if possible)
Not possible. See included log contents
[7.] Environment
PWD=/root
HZ=100
HOSTNAME=neon
MOZILLA_HOME=/usr/lib/netscape
ignoreeof=10
LS_OPTIONS= --color=auto -F -b -T 0
OPENWINHOME=/usr/openwin
VIMRUNTIME=/usr/local/share/vim/vim56
MANPATH=/usr/local/man:/usr/man/preformat:/usr/man:/usr/X11R6/man:/usr/openwin/man:/usr/share/texmf/man
LESSOPEN=|lesspipe.sh %s
LESS=-M
USER=root
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.bz2=01;31:*.rpm=01;31:*.deb=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.jpg=01;35:*.gif=01;35:*.bmp=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.mpg=01;37:*.avi=01;37:*.mov=01;37:
MACHTYPE=i386-slackware-linux-gnu
MAIL=/var/spool/mail/root
LOGNAME=root
SHLVL=2
HUSHLOGIN=FALSE
MINICOM=-c on
_=/usr/bin/env
SHELL=/bin/bash
HOSTTYPE=i386
OSTYPE=linux-gnu
TERM=linux
HOME=/root
PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/openwin/bin:/usr/games:/usr/share/texmf/bin
VIM=/usr/local/share/vim
[7.1.] Software (add the output of the ver_linux script here)
-- Versions installed: (if some fields are empty or look
-- unusual then possibly you have very old versions)
Linux neon 2.3.99-pre6 #1 Tue May 2 23:44:27 MDT 2000 i586 unknown
Kernel modules 2.1.121
Gnu C egcs-2.91.66
Binutils 2.9.1.0.25
Linux C Library 2.1.2
Dynamic linker ldd: version 1.9.9
Procps 2.0.2
Mount 2.9v
Net-tools 1.52
Kbd 0.99
Sh-utils 1.16
Modules Loaded bsd_comp ppp_generic slip
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 6
model name : AMD-K6tm w/ multimedia extensions
stepping : 2
cpu MHz : 224.537210
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 sep mmx
bogomips : 447.28
[7.3.] Module information (from /proc/modules):
bsd_comp 3932 0 (unused)
ppp_generic 15472 0 [bsd_comp]
slip 7856 0 (unused)
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
2180-219f : Intel Corporation 82371AB PIIX4 ACPI
8000-803f : Intel Corporation 82371AB PIIX4 ACPI
f400-f4ff : ATI Technologies Inc 3D Rage Pro 215GP
f800-f8ff : ATI Technologies Inc 264VT3 [Mach64 VT3]
fc00-fc7f : VIA Technologies, Inc. VT86C100A [Rhine 10/100]
fc00-fc7f : eth0
fc90-fc9f : Intel Corporation 82371AB PIIX4 IDE
fc90-fc97 : ide0
fc98-fc9f : ide1
fca0-fcbf : Intel Corporation 82371AB PIIX4 USB
fca0-fcbf : usb-uhci
fcc0-fcff : Ensoniq ES1371 [AudioPCI-97]
fcc0-fcff : es1371
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-03ffffff : System RAM
00100000-0029058f : Kernel code
00290590-002abfa7 : Kernel data
fc000000-fcffffff : ATI Technologies Inc 3D Rage Pro 215GP
fd000000-fdffffff : ATI Technologies Inc 264VT3 [Mach64 VT3]
fedfd000-fedfdfff : ATI Technologies Inc 264VT3 [Mach64 VT3]
fedfe000-fedfefff : ATI Technologies Inc 3D Rage Pro 215GP
fedffc00-fedffc7f : VIA Technologies, Inc. VT86C100A [Rhine 10/100]
fedffc00-fedffc7f : eth0
ffff1000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corporation 430TX - 82439TX MTXC (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 32 set
00:01.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 set
00:01.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 set
Region 4: I/O ports at fc90
00:01.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at fca0
00:01.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 01)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:0a.0 Multimedia audio controller: Ensoniq ES1371 (rev 08)
Subsystem: Unknown device 1274:1371
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 12 min, 128 max, 96 set
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at fcc0
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI+ D1- D2+ PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3043 (rev 06)
Subsystem: Unknown device 1186:1400
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 118 min, 152 max, 200 set, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at fc00
Region 1: Memory at fedffc00 (32-bit, non-prefetchable)
00:0c.0 VGA compatible controller: ATI Technologies Inc 215GP [Mach64 GP] (rev 5c)
Subsystem: Unknown device 1002:4750
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 8 min, 66 set, cache line size 08
Region 0: Memory at fc000000 (32-bit, prefetchable)
Region 1: I/O ports at f400
Region 2: Memory at fedfe000 (32-bit, non-prefetchable)
00:0d.0 VGA compatible controller: ATI Technologies Inc 264VTB [Mach64 VTB] (rev 9a)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [disabled]
Region 1: I/O ports at f800 [disabled]
Region 2: Memory at fedfd000 (32-bit, non-prefetchable) [disabled]
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices: none
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
I have tried attaching a Kodak DC-280 camera and SanDisk SDDR-31 CF reader
to the hub in the monitor. None of these devices is recognized.
[X.] Other notes, patches, fixes, workarounds:
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_DEVICEFS=y
CONFIG_USB_UHCI_ALT=y
# CONFIG_USB_OHCI is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_OV511 is not set
CONFIG_USB_DC2XX=y
# CONFIG_USB_MDC800 is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_USS720 is not set
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_PLUSB is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_DSBR is not set
CONFIG_USB_HID=y
# CONFIG_USB_WACOM is not set
# CONFIG_USB_WMFORCE is not set
CONFIG_INPUT_KEYBDEV=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
hid
80- 95: dc2xx
hub
usbdevfs
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=fca0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0781 ProdID=0002 Rev= 0.09
S: Manufacturer=SanDisk Corporation
S: Product=ImageMate CompactFlash USB
S: SerialNumber=000000000003
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=045e ProdID=000b Rev= 1.04
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl= 10ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=fca0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=09(hub ) Sub=01 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0698 ProdID=9999 Rev= 0.01
C:* #Ifs= 1 Cfg#= 1 Atr=60 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=01 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl= 32ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=045e ProdID=000b Rev= 1.04
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl= 10ms
May 22 23:23:59 neon syslogd 1.3-3: restart.
May 22 23:24:01 neon kernel: klogd 1.3-3, log source = /proc/kmsg started.
May 22 23:24:01 neon kernel: Inspecting /boot/System.map
May 22 23:24:01 neon kernel: Loaded 19 symbols from 3 modules.
May 22 23:24:01 neon kernel: Checking 386/387 coupling... OK, FPU using exception 16
error reporting.
May 22 23:24:01 neon kernel: Checking 'hlt' instruction... OK.
May 22 23:24:01 neon kernel: Limiting direct PCI/PCI transfers.
May 22 23:24:01 neon kernel: usb.c: registered new driver usbdevfs
May 22 23:24:01 neon kernel: usb.c: registered new driver hub
May 22 23:24:01 neon kernel: uhci.c: USB UHCI at I/O 0xfca0, IRQ 9
May 22 23:24:01 neon kernel: uhci.c: detected 2 ports
May 22 23:24:01 neon kernel: usb.c: new USB bus registered, assigned bus number 1
May 22 23:24:01 neon kernel: usb.c: USB new device connect, assigned device number 1
May 22 23:24:01 neon kernel: hub.c: USB hub found
May 22 23:24:01 neon kernel: hub.c: 2 ports detected
May 22 23:24:01 neon kernel: Linux NET4.0 for Linux 2.3
May 22 23:24:01 neon kernel: Based upon Swansea University Computer Society NET3.039
May 22 23:24:01 neon kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
May 22 23:24:01 neon kernel: NET4: Linux TCP/IP 1.0 for NET4.0
May 22 23:24:01 neon kernel: IP Protocols: ICMP, UDP, TCP
May 22 23:24:01 neon kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
May 22 23:24:01 neon kernel: lp0: using parport0 (polling).
May 22 23:24:01 neon kernel: Uniform Multi-Platform E-IDE driver Revision: 6.30
May 22 23:24:01 neon kernel: usb.c: USB new device connect, assigned device number 2
May 22 23:24:01 neon kernel: usb.c: USB new device connect, assigned device number 3
May 22 23:24:01 neon kernel: hda: 12594960 sectors (6449 MB) w/512KiB Cache,
CHS=13328/15/63, UDMA(33)
May 22 23:24:01 neon kernel: hdb: 29336832 sectors (15020 MB) w/418KiB Cache,
CHS=31044/15/63, UDMA(33)
May 22 23:24:01 neon kernel: Uniform CD-ROM driver Revision: 3.07
May 22 23:24:01 neon kernel: Partition check:
May 22 23:24:01 neon kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
May 22 23:24:01 neon kernel: hdb: hdb1
May 22 23:24:01 neon kernel: Floppy drive(s): fd0 is 1.44M
May 22 23:24:01 neon kernel: FDC 0 is a National Semiconductor PC87306
May 22 23:24:01 neon kernel: Serial driver version 4.93 (2000-03-20) with MANY_PORTS
SHARE_IRQ SERIAL_PCI ISAPNP enabled
May 22 23:24:01 neon kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
May 22 23:24:01 neon kernel: ppdev: user-space parallel port driver
May 22 23:24:01 neon kernel: via-rhine.c:v1.03a-LK1.1.4 3/28/2000 Written by Donald
Becker
May 22 23:24:01 neon kernel:
http://cesdis.gsfc.nasa.gov/linux/drivers/via-rhine.html
May 22 23:24:01 neon kernel: eth0: VIA VT3043 Rhine at 0xfc00, 00:50:ba:ad:6a:c4, IRQ
10.
May 22 23:24:01 neon kernel: eth0: MII PHY found at address 8, status 0x7829
advertising 05e1 Link 40a1.
May 22 23:24:01 neon kernel: es1371: version v0.25 time 23:47:10 May 2 2000
May 22 23:24:01 neon kernel: es1371: found chip, vendor id 0x1274 device id 0x1371
revision 0x08
May 22 23:24:01 neon kernel: es1371: found es1371 rev 8 at io 0xfcc0 irq 11
May 22 23:24:01 neon kernel: es1371: features: joystick 0x0
May 22 23:24:01 neon kernel: ac97_codec: AC97 Audio codec, vendor id1: 0x4352, id2:
0x5913 (Cirrus Logic CS4297A)
May 22 23:24:01 neon kernel: usb.c: registered new driver dc2xx
May 22 23:24:01 neon kernel: usb.c: registered new driver hid
May 22 23:24:01 neon kernel: input0: USB HID v1.00 Keyboard
May 22 23:24:01 neon kernel: Adding Swap: 68004k swap-space (priority -1)
May 22 23:24:01 neon kernel: SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic
channels, max=256) (6 bit encapsulation enabled).
May 22 23:24:01 neon kernel: SLIP linefill/keepalive option.
May 22 23:24:01 neon kernel: PPP generic driver version 2.4.1
May 22 23:24:01 neon kernel: PPP BSD Compression module registered
May 22 23:24:12 neon sendmail[116]: starting daemon (8.9.3): SMTP+queueing@00:15:00
May 22 23:24:19 neon login[131]: ROOT LOGIN on `tty1'
May 22 23:28:01 neon kernel: usb.c: USB disconnect on device 3
May 22 23:28:07 neon kernel: usb.c: USB new device connect, assigned device number 3
May 22 23:28:07 neon kernel: hub.c: USB hub found
May 22 23:36:28 neon login[132]: ROOT LOGIN on `tty2'
May 22 23:42:55 neon modprobe: can't locate module block-major-8
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
