> Could you send the 2.4.0 test results again? thanks.
>
Sure. Using 2.4.1-test1 a 'mount /dev/sdc1 /mnt' or a 'fdisk /dev/sdc'
results in the following:
May 26 11:10:22 desktop kernel: usb-storage.c: us_queuecommand() called
May 26 11:10:22 desktop kernel: usb-storage.c: *** thread awakened.
May 26 11:10:22 desktop kernel: usb-storage.c: Command START_STOP (6
bytes)
May 26 11:10:22 desktop kernel: usb-storage.c: 1b 00 00 00 01 00 f9 cb
05 60
May 26 11:10:22 desktop kernel: usb-storage.c: Call to
usb_stor_control_msg() returned -32
May 26 11:10:22 desktop kernel: usb-storage.c: -- Stall on control pipe.
Clearing
May 26 11:10:22 desktop kernel: usb-storage.c: -- usb_clear_halt() returns
0
May 26 11:10:22 desktop kernel: usb-storage.c: -- CB transport device
requiring auto-sense
May 26 11:10:22 desktop kernel: usb-storage.c: -- transport indicates
command failure
May 26 11:10:22 desktop kernel: usb-storage.c: Issuing auto-REQUEST_SENSE
May 26 11:10:22 desktop kernel: usb-storage.c: Call to
usb_stor_control_msg() returned 12
May 26 11:10:22 desktop kernel: usb-storage.c: us_transfer_partial(): xfer
18 bytes
May 26 11:10:22 desktop kernel: usb-storage.c: usb_stor_bulk_msg()
returned 0 xferred 18/18
May 26 11:10:22 desktop kernel: usb-storage.c: us_transfer_partial():
transfer complete
May 26 11:10:22 desktop kernel: usb-storage.c: CB data stage result is 0x0
May 26 11:10:22 desktop kernel: usb-storage.c: -- Result from auto-sense
is 0
May 26 11:10:22 desktop kernel: usb-storage.c: -- code: 0x70, key: 0x5,
ASC: 0x20, ASCQ: 0x0
May 26 11:10:22 desktop kernel: usb-storage.c: scsi cmd done, result=0x1
May 26 11:10:22 desktop kernel: usb-storage.c: *** thread sleeping.
May 26 11:10:22 desktop kernel: SCSI device (ioctl) reports ILLEGAL
REQUEST.
May 26 11:10:22 desktop kernel: VFS: Disk change detected on device
sd(8,32)
May 26 11:10:22 desktop kernel: usb-storage.c: us_queuecommand() called
May 26 11:10:22 desktop kernel: usb-storage.c: *** thread awakened.
May 26 11:10:22 desktop kernel: usb-storage.c: Command TEST_UNIT_READY (6
bytes)
May 26 11:10:22 desktop kernel: usb-storage.c: 00 00 00 00 00 00 00 00
00 00
May 26 11:10:22 desktop kernel: usb-storage.c: Call to
usb_stor_control_msg() returned 12
May 26 11:10:22 desktop kernel: usb-storage.c: -- CB transport device
requiring auto-sense
May 26 11:10:22 desktop kernel: usb-storage.c: Issuing auto-REQUEST_SENSE
May 26 11:10:22 desktop kernel: usb-storage.c: Call to
usb_stor_control_msg() returned 12
May 26 11:10:22 desktop kernel: usb-storage.c: us_transfer_partial(): xfer
18 bytes
May 26 11:10:22 desktop kernel: usb-storage.c: usb_stor_bulk_msg()
returned 0 xferred 18/18
May 26 11:10:22 desktop kernel: usb-storage.c: us_transfer_partial():
transfer complete
May 26 11:10:22 desktop kernel: usb-storage.c: CB data stage result is 0x0
May 26 11:10:22 desktop kernel: usb-storage.c: -- Result from auto-sense
is 0
May 26 11:10:22 desktop kernel: usb-storage.c: -- code: 0x70, key: 0x0,
ASC: 0x0, ASCQ: 0x0
May 26 11:10:22 desktop kernel: usb-storage.c: scsi cmd done, result=0x0
May 26 11:10:22 desktop kernel: usb-storage.c: *** thread sleeping.
May 26 11:10:22 desktop kernel: usb-storage.c: us_queuecommand() called
May 26 11:10:22 desktop kernel: usb-storage.c: *** thread awakened.
May 26 11:10:22 desktop kernel: usb-storage.c: Command READ_CAPACITY (10
bytes)
May 26 11:10:22 desktop kernel: usb-storage.c: 25 00 00 00 00 00 00 00
00 00
May 26 11:10:22 desktop kernel: usb-storage.c: Call to
usb_stor_control_msg() returned 12
May 26 11:10:22 desktop kernel: usb-storage.c: us_transfer_partial(): xfer
8 bytes
May 26 11:10:22 desktop kernel: usb-storage.c: usb_stor_bulk_msg()
returned 0 xferred 8/8
May 26 11:10:22 desktop kernel: usb-storage.c: us_transfer_partial():
transfer complete
May 26 11:10:22 desktop kernel: usb-storage.c: CB data stage result is 0x0
May 26 11:10:22 desktop kernel: usb-storage.c: -- CB transport device
requiring auto-sense
May 26 11:10:22 desktop kernel: usb-storage.c: Issuing auto-REQUEST_SENSE
May 26 11:10:22 desktop kernel: usb-storage.c: Call to
usb_stor_control_msg() returned 12
May 26 11:10:22 desktop kernel: usb-storage.c: us_transfer_partial(): xfer
18 bytes
May 26 11:10:22 desktop kernel: usb-storage.c: usb_stor_bulk_msg()
returned 0 xferred 18/18
May 26 11:10:22 desktop kernel: usb-storage.c: us_transfer_partial():
transfer complete
May 26 11:10:22 desktop kernel: usb-storage.c: CB data stage result is 0x0
May 26 11:10:22 desktop kernel: usb-storage.c: -- Result from auto-sense
is 0
May 26 11:10:22 desktop kernel: usb-storage.c: -- code: 0x70, key: 0x0,
ASC: 0x0, ASCQ: 0x0
May 26 11:10:22 desktop kernel: usb-storage.c: scsi cmd done, result=0x0
May 26 11:10:22 desktop kernel: usb-storage.c: *** thread sleeping.
May 26 11:10:22 desktop kernel: SCSI device sdc: hdwr sector= 512 bytes.
Sectors= 7904 [3 MB] [0.0 GB]
May 26 11:10:22 desktop kernel: usb-storage.c: us_queuecommand() called
May 26 11:10:22 desktop kernel: usb-storage.c: *** thread awakened.
May 26 11:10:22 desktop kernel: usb-storage.c: Command MODE_SENSE (6
bytes)
May 26 11:10:22 desktop kernel: usb-storage.c: 1a 00 01 00 0c 00 00 00
00 00
May 26 11:10:22 desktop kernel: usb-storage.c: Call to
usb_stor_control_msg() returned 12
May 26 11:10:22 desktop kernel: usb-storage.c: us_transfer_partial(): xfer
512 bytes
May 26 11:10:22 desktop kernel: usb-storage.c: usb_stor_bulk_msg()
returned 0 xferred 8/512
May 26 11:10:22 desktop kernel: usb-storage.c: CB data stage result is 0x1
May 26 11:10:22 desktop kernel: usb-storage.c: -- CB transport device
requiring auto-sense
May 26 11:10:22 desktop kernel: usb-storage.c: Issuing auto-REQUEST_SENSE
May 26 11:10:22 desktop kernel: usb-storage.c: Call to
usb_stor_control_msg() returned 12
May 26 11:10:22 desktop kernel: usb-storage.c: us_transfer_partial(): xfer
18 bytes
May 26 11:10:22 desktop kernel: usb-storage.c: usb_stor_bulk_msg()
returned 0 xferred 18/18
May 26 11:10:22 desktop kernel: usb-storage.c: us_transfer_partial():
transfer complete
May 26 11:10:22 desktop kernel: usb-storage.c: CB data stage result is 0x0
May 26 11:10:22 desktop kernel: usb-storage.c: -- Result from auto-sense
is 0
May 26 11:10:22 desktop kernel: usb-storage.c: -- code: 0x70, key: 0x0,
ASC: 0x0, ASCQ: 0x0
May 26 11:10:22 desktop kernel: usb-storage.c: new MODE_SENSE_6 data = 06
00 00 00
May 26 11:10:22 desktop kernel: usb-storage.c: scsi cmd done, result=0x0
May 26 11:10:22 desktop kernel: usb-storage.c: *** thread sleeping.
May 26 11:10:22 desktop kernel: sdc: Write Protect is off
May 26 11:10:22 desktop kernel: sdc: I/O error: dev 08:20, sector 0
May 26 11:10:22 desktop kernel: unable to read partition table
May 26 11:10:22 desktop kernel: usb-storage.c: us_queuecommand() called
May 26 11:10:22 desktop kernel: usb-storage.c: *** thread awakened.
May 26 11:10:22 desktop kernel: usb-storage.c: Command
ALLOW_MEDIUM_REMOVAL (6 bytes)
May 26 11:10:22 desktop kernel: usb-storage.c: 1e 00 00 00 01 00 00 00
20 00
May 26 11:10:22 desktop kernel: usb-storage.c: Call to
usb_stor_control_msg() returned -32
May 26 11:10:22 desktop kernel: usb-storage.c: -- Stall on control pipe.
Clearing
May 26 11:10:22 desktop kernel: usb-storage.c: -- usb_clear_halt() returns
0
May 26 11:10:22 desktop kernel: usb-storage.c: -- CB transport device
requiring auto-sense
May 26 11:10:22 desktop kernel: usb-storage.c: -- transport indicates
command failure
May 26 11:10:22 desktop kernel: usb-storage.c: Issuing auto-REQUEST_SENSE
May 26 11:10:22 desktop kernel: usb-storage.c: Call to
usb_stor_control_msg() returned 12
May 26 11:10:22 desktop kernel: usb-storage.c: us_transfer_partial(): xfer
18 bytes
May 26 11:10:22 desktop kernel: usb-storage.c: usb_stor_bulk_msg()
returned 0 xferred 18/18
May 26 11:10:22 desktop kernel: usb-storage.c: us_transfer_partial():
transfer complete
May 26 11:10:22 desktop kernel: usb-storage.c: CB data stage result is 0x0
May 26 11:10:22 desktop kernel: usb-storage.c: -- Result from auto-sense
is 0
May 26 11:10:22 desktop kernel: usb-storage.c: -- code: 0x70, key: 0x5,
ASC: 0x24, ASCQ: 0x0
May 26 11:10:22 desktop kernel: usb-storage.c: scsi cmd done, result=0x1
May 26 11:10:22 desktop kernel: usb-storage.c: *** thread sleeping.
May 26 11:10:22 desktop kernel: I/O error: dev 08:20, sector 0
--
There is no spoon...
http://home.knuut.de/sthenning
PGP Public Key @ http://home.knuut.de/sthenning/henning.gpg
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
