Hi, On 03-09-18 15:36, Heikki Krogerus wrote:
PI3USB30532 is used for muxing the port to DisplayPort on CHT platforms, so changing the connection ID so that the mux will get assigned to the alternate mode device and not the port device. Connection ID "typec-mux" is now reserved for Accessory Modes.Signed-off-by: Heikki Krogerus <heikki.kroge...@linux.intel.com> --- drivers/platform/x86/intel_cht_int33fe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c index b0cef48f77af..f8c881f871f9 100644 --- a/drivers/platform/x86/intel_cht_int33fe.c +++ b/drivers/platform/x86/intel_cht_int33fe.c @@ -179,7 +179,7 @@ static int cht_int33fe_probe(struct i2c_client *client) data->connections[0].id = "typec-switch"; data->connections[1].endpoint[0] = "i2c-fusb302"; data->connections[1].endpoint[1] = "i2c-pi3usb30532"; - data->connections[1].id = "typec-mux"; + data->connections[1].id = "idff01m01";
Hmm, so the mux will start in open connection and needs to be moved from open to TYPEC_STATE_USB when doing USB3, I assume the alternative driver is only going to come into play when actually using a DP over Type-C capable device/dongle, so what will do the TYPEC_STATE_SAFE -> TYPEC_STATE_USB switching now ? Regards, Hans
