Hi,
On 04-09-18 09:44, Heikki Krogerus wrote:
On Tue, Sep 04, 2018 at 09:40:35AM +0200, Hans de Goede wrote:
HI,
On 04-09-18 09:37, Heikki Krogerus wrote:
Hi Hans,
On Mon, Sep 03, 2018 at 04:59:51PM +0200, Hans de Goede wrote:
Hi,
On 03-09-18 15:36, Heikki Krogerus wrote:
PI3USB30532 is used for muxing the port to DisplayPort on
CHT platforms, so changing the connection ID so that the
mux will get assigned to the alternate mode device and not
the port device. Connection ID "typec-mux" is now reserved
for Accessory Modes.
Signed-off-by: Heikki Krogerus <heikki.kroge...@linux.intel.com>
---
drivers/platform/x86/intel_cht_int33fe.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/platform/x86/intel_cht_int33fe.c
b/drivers/platform/x86/intel_cht_int33fe.c
index b0cef48f77af..f8c881f871f9 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -179,7 +179,7 @@ static int cht_int33fe_probe(struct i2c_client *client)
data->connections[0].id = "typec-switch";
data->connections[1].endpoint[0] = "i2c-fusb302";
data->connections[1].endpoint[1] = "i2c-pi3usb30532";
- data->connections[1].id = "typec-mux";
+ data->connections[1].id = "idff01m01";
Hmm, so the mux will start in open connection and needs to
be moved from open to TYPEC_STATE_USB when doing USB3, I assume
the alternative driver is only going to come into play when
actually using a DP over Type-C capable device/dongle, so what
will do the TYPEC_STATE_SAFE -> TYPEC_STATE_USB switching now ?
Ah, for some reason I assumed that the orientation switch will take
care of that, but of course it does not. So we'll keep the existing
connections, and just add a new one for the alt mode device.
Ok, so I assume you are going to send a v3 for this ?
Yes. Let me know if there is any other problems.
Otherwise the series looks good to me.
Regards,
Hans
