On Mon, Feb 11, 2013 at 03:58:44PM +0200, Felipe Balbi wrote: > On Mon, Feb 11, 2013 at 03:55:06PM +0200, Felipe Balbi wrote: > > Hi, > > > > On Mon, Feb 11, 2013 at 05:26:41PM +0530, kishon wrote: > > > Hi, > > > > > > On Monday 11 February 2013 05:07 PM, Felipe Balbi wrote: > > > >On Mon, Feb 11, 2013 at 05:02:15PM +0530, kishon wrote: > > > >>Hi, > > > >> > > > >>On Monday 11 February 2013 03:22 PM, Felipe Balbi wrote: > > > >>>Add support for basic power management on > > > >>>the dwc3 driver. While there is still lots > > > >>>to improve for full PM support, this minimal > > > >>>patch will already make sure that we survive > > > >>>suspend-to-ram and suspend-to-disk without > > > >>>major issues. > > > >> > > > >>It can work only till retention or it can work with off-mode too with > > > >>this series? Form what I could make out, it'll work till retention. > > > >>right? > > > > > > > >this is not runtime PM and I haven't tested with OMAP. All in all, it > > > >should work with both, but only testing will tell. Maybe we _do_ need to > > > >restart the whole IP in that case. At least with PCIe FPGA, it survived > > > >just fine a suspend-to-ram (echo mem > /sys/power/state). > > > > > > > >I'll see if I can test suspend-to-disk later today or tomorrow. > > > > > > Ok. Just one thing. I don't see three registers getting restored > > > properly (needed when suspend-to-disk). One is DWC3_GCTL, which is > > > being initialized in dwc3_core_init and the other is DWC3_DCFG and > > > DWC3_DCTL initialized in dwc3_gadget_init(). > > > > will fix that up, thanks. > > actually, dctl isn't needed. I'm reconnecting pullups on resume which > will set dctl to a correct value.
my bad, I'll loose HIRD threshold if I don't save it, will add to the patch. -- balbi
signature.asc
Description: Digital signature
