Hi Paul,
while continuing this patch, I stumbled upon a bit of code which doesn't
make sense to me. In dwc2_dump_global_registers is the following bit:
if (hsotg->core_params->en_multiple_tx_fifo <= 0) {
ep_num = hsotg->hwcfg4 >> GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT &
GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK >>
GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT;
txfsiz = "DPTXFSIZ";
} else {
ep_num = hsotg->hwcfg4 >> GHWCFG4_NUM_IN_EPS_SHIFT &
GHWCFG4_NUM_IN_EPS_MASK >> GHWCFG4_NUM_IN_EPS_SHIFT;
txfsiz = "DIENPTXF";
}
for (i = 0; i < ep_num; i++) {
addr = hsotg->regs + DPTXFSIZN(i + 1);
dev_dbg(hsotg->dev, "%s[%d] @0x%08lX : 0x%08X\n", txfsiz, i + 1,
(unsigned long)addr, readl(addr));
}
There's a number of things:
- In the else above, the register name is set to DIENPTXF, but the values are
always read from DPTXFSIZN?
- According to my docs for GHWCFG4_NUM_IN_EPS, the actual number of endpoints
is the value read + 1.
- This would result in 1-16 eps, but FIFO numbers are from 1-15 for DPTXFSIZ.
Do you know what the deal is here? Or, given that this is only debug output for
device mode only, shall we just remove this code for now?
Gr.
Matthijs
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
