Series adds USB host support for Keystone SOCs. Keystone SOCs uses dwc3 hardware IP implementation. On Keystone II platforms, we use no-op phy driver.
All three patches are posted together just for completeness. Only first patch is expected to go via usb tree and other two via linux-keystone tree. Patchset are tested on Keystone II EVM with USB2.0 and USB3.0 flash drives. Cc: Santosh Shilimkar <santosh.shilim...@ti.com> WingMan Kwok (3): usb: dwc3: Add Keystone specific glue layer ARM: dts: keystone: Add usb devicetree bindings ARM: keystone: defconfig: enable USB host mode support .../devicetree/bindings/usb/keystone-usb.txt | 43 ++++ arch/arm/boot/dts/keystone.dtsi | 27 ++ arch/arm/configs/keystone_defconfig | 20 +- drivers/usb/dwc3/Kconfig | 7 + drivers/usb/dwc3/Makefile | 1 + drivers/usb/dwc3/dwc3-keystone.c | 272 ++++++++++++++++++++ 6 files changed, 369 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/usb/keystone-usb.txt create mode 100644 drivers/usb/dwc3/dwc3-keystone.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html