The dra7-usb2 and am437-usb2 bindings have not yet been used. Change them to be more elegant.
Signed-off-by: Roger Quadros <rog...@ti.com> --- Documentation/devicetree/bindings/phy/ti-phy.txt | 4 ++-- drivers/phy/phy-omap-control.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 5c5b1b0..28e674b 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -9,9 +9,9 @@ Required properties: e.g. USB2_PHY on OMAP5. "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control e.g. USB3 PHY and SATA PHY on OMAP5. - "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on + "ti,control-phy-dra7-usb2" - if it has power down register like USB2 PHY on DRA7 platform. - "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on + "ti,control-phy-am437-usb2" - if it has power down register like USB2 PHY on AM437 platform. - reg : Address and length of the register set for the device. It contains the address of "otghs_control" for control-phy-otghs or "power" register diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c index 17fc200..a7e2d7f 100644 --- a/drivers/phy/phy-omap-control.c +++ b/drivers/phy/phy-omap-control.c @@ -228,11 +228,11 @@ static const struct of_device_id omap_control_phy_id_table[] = { .data = &pipe3_data, }, { - .compatible = "ti,control-phy-dra7usb2", + .compatible = "ti,control-phy-dra7-usb2", .data = &dra7usb2_data, }, { - .compatible = "ti,control-phy-am437usb2", + .compatible = "ti,control-phy-am437-usb2", .data = &am437usb2_data, }, {}, -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html