From: Roger Quadros <rog...@ti.com> The dra7-usb2 and am437-usb2 bindings have not yet been used. Change them to be more elegant.
Acked-by: Kishon Vijay Abraham I <kis...@ti.com> Signed-off-by: Roger Quadros <rog...@ti.com> Signed-off-by: Felipe Balbi <ba...@ti.com> --- Here's updated patch with only Documentation. Tell me if it's ok to apply. Documentation/devicetree/bindings/phy/ti-phy.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 41dc132..8694aae 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -9,9 +9,9 @@ Required properties: e.g. USB2_PHY on OMAP5. "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control e.g. USB3 PHY and SATA PHY on OMAP5. - "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on + "ti,control-phy-dra7-usb2" - if it has power down register like USB2 PHY on DRA7 platform. - "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on + "ti,control-phy-am437-usb2" - if it has power down register like USB2 PHY on AM437 platform. - reg : Address and length of the register set for the device. It contains the address of "otghs_control" for control-phy-otghs or "power" register -- 1.9.0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html