This commit adds separate functions for getting the host and device
specific hardware params. These functions check whether the parameters
need to be read at all, depending on dr_mode, and they force the mode
only if necessary. This saves some delays during probe.
Signed-off-by: John Youn <johny...@synopsys.com>
---
drivers/usb/dwc2/core.c | 93 +++++++++++++++++++++++++++++++++++++------------
drivers/usb/dwc2/core.h | 1 +
2 files changed, 71 insertions(+), 23 deletions(-)
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index caaff42..91d63a8 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -3159,17 +3159,76 @@ static void dwc2_clear_force_mode(struct dwc2_hsotg
*hsotg)
usleep_range(25000, 50000);
}
+/*
+ * Gets host hardware parameters. Forces host mode if not currently in
+ * host mode. Should be called immediately after a core soft reset in
+ * order to get the reset values.
+ */
+static void dwc2_get_host_hwparams(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_hw_params *hw = &hsotg->hw_params;
+ u32 gnptxfsiz;
+ u32 hptxfsiz;
+ bool forced;
+
+ if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
+ return;
+
+ forced = dwc2_force_host_if_needed(hsotg);
+
+ gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
+ hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ);
+ dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
+ dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz);
+
+ if (forced)
+ dwc2_clear_force_mode(hsotg);
+
+ hw->host_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
+ FIFOSIZE_DEPTH_SHIFT;
+ hw->host_perio_tx_fifo_size = (hptxfsiz & FIFOSIZE_DEPTH_MASK) >>
+ FIFOSIZE_DEPTH_SHIFT;
+}
+
+/*
+ * Gets device hardware parameters. Forces device mode if not
+ * currently in device mode. Should be called immediately after a core
+ * soft reset in order to get the reset values.
+ */
+static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_hw_params *hw = &hsotg->hw_params;
+ bool forced;
+ u32 gnptxfsiz;
+
+ if (hsotg->dr_mode == USB_DR_MODE_HOST)
+ return;
+
+ forced = dwc2_force_device_if_needed(hsotg);
+
+ gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
+ dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
+
+ if (forced)
+ dwc2_clear_force_mode(hsotg);
+
+ hw->dev_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
+ FIFOSIZE_DEPTH_SHIFT;
+}
+
/**
* During device initialization, read various hardware configuration
* registers and interpret the contents.
+ *
+ * This should be called during driver probe. It will perform a core
+ * soft reset in order to get the reset values of the parameters.
*/
int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
{
struct dwc2_hw_params *hw = &hsotg->hw_params;
unsigned width;
u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;
- u32 hptxfsiz, grxfsiz, gnptxfsiz;
- u32 gusbcfg = 0;
+ u32 grxfsiz;
int retval;
/*
@@ -3206,23 +3265,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
dev_dbg(hsotg->dev, "hwcfg4=%08x\n", hwcfg4);
dev_dbg(hsotg->dev, "grxfsiz=%08x\n", grxfsiz);
- /* Force host mode to get HPTXFSIZ / GNPTXFSIZ exact power on value */
- if (hsotg->dr_mode != USB_DR_MODE_HOST) {
- gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- dwc2_writel(gusbcfg | GUSBCFG_FORCEHOSTMODE,
- hsotg->regs + GUSBCFG);
- usleep_range(25000, 50000);
- }
-
- gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
- hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ);
- dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
- dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz);
- if (hsotg->dr_mode != USB_DR_MODE_HOST) {
- dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- usleep_range(25000, 50000);
- }
-
/* hwcfg2 */
hw->op_mode = (hwcfg2 & GHWCFG2_OP_MODE_MASK) >>
GHWCFG2_OP_MODE_SHIFT;
@@ -3270,10 +3312,15 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
/* fifo sizes */
hw->host_rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >>
GRXFSIZ_DEPTH_SHIFT;
- hw->host_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
- FIFOSIZE_DEPTH_SHIFT;
- hw->host_perio_tx_fifo_size = (hptxfsiz & FIFOSIZE_DEPTH_MASK) >>
- FIFOSIZE_DEPTH_SHIFT;
+
+ /*
+ * Host/device specific hardware parameters. Reading these
+ * parameters requires the controller to be in either host or
+ * device mode. The mode will be forced, if necessary, to read
+ * these values.
+ */
+ dwc2_get_host_hwparams(hsotg);
+ dwc2_get_dev_hwparams(hsotg);
dev_dbg(hsotg->dev, "Detected values from hardware:\n");
dev_dbg(hsotg->dev, " op_mode=%d\n",
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 8f2a9ff..c68dfe1 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -478,6 +478,7 @@ struct dwc2_hw_params {
unsigned en_multiple_tx_fifo:1;
unsigned host_rx_fifo_size:16;
unsigned host_nperio_tx_fifo_size:16;
+ unsigned dev_nperio_tx_fifo_size:16;
unsigned host_perio_tx_fifo_size:16;
unsigned nperio_tx_q_depth:3;
unsigned host_perio_tx_q_depth:3;
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
