Dear Oliver, Sorry about my last message, the bug is actually still going on. I found something interesting though: when AC is plugged, USB is working totally OK, but when on battery, then here comes trouble... Could this be power management?
Below is my TLP config (mostly default) if it's any help: http://paste.opensuse.org/8168b819 I tried to disable USB-suspend: doesn't change anything. I cannot unload xhci_hcd module: # modprobe -r xhci_hcd modprobe: FATAL: Module xhci_hcd is in use. Something specific I should use? Also, after entering your command below to enhance debug, dmesg is still not showing anything when USB is plugged. Still, below is the output of dmesg when "udevadm trigger" is entered with a USB mouse plugged: http://paste.opensuse.org/325663de Hope this helps and sorry for the confusion with my last e-mail. Cheers, Pierre. Le mardi 20 septembre 2016, 09:43:57 NZST Pierre de Villemereuil a écrit : > Dear Oliver, > > I'm not really sure what happened, but now USB appears to be working > perfectly well... In the meantime, since my last checks, I simply updated > Tumbleweed and entered the command below as root (I rebooted twice since > then: USB still working!). > > I didn't find anything relevant in the Tumbleweed updates, only this one is > related to USB, but the only commit doesn't seem to be fixing anything at > runtime: > > ==== usb_modeswitch ==== > Subpackages: usb_modeswitch-data > > - Avoid a race in make install, which lead to packaging a truncated > usb_modeswitch_dispatcher script. Fixes boo#998641 > > But I dont think the command below is still active after a reboot (is it?) > and it seems just to activate some more debugging, so I really don't > understand how this happened! > > Sorry, this must be a quite frustrating report... > > Cheers, > Pierre. > > Le lundi 19 septembre 2016, 11:22:52 NZST Oliver Neukum a écrit : > > On Sun, 2016-09-18 at 19:48 +1200, Pierre de Villemereuil wrote: > > > Dear kernel devs, > > > > > > I'm using openSUSE Tumbleweed (kernel 4.7.2-2-default) on an ASUS > > > Vivobook > > > Flip TP301UA-C4028T, see here for specs: > > > https://www.asus.com/Notebooks/ASUS-VivoBook-Flip-TP301UA/specifications > > > / > > > > > > Since my install in July, USB hot-plug (a.k.a. plug'n'play) is not > > > working. To make any USB device working (I tested many USB keys, a > > > slideshow remote control and a mouse), it has to be plugged on boot up > > > or > > > wake up from suspend. Using the following command also make the system > > > aware that USB is connected: udevadm trigger > > > > > > More information can be found on the following thread on the openSUSE > > > forums: > > > https://forums.opensuse.org/showthread.php/519926-No-USB-device-detected > > > > Basically dmesg should show a hotplug. What happens if you unload and > > reload the xhci_hcd modules? > > > > And please do > > > > echo "module xhci_hcd +mpf" > /sys/kernel/debug/dynamic_debug/control > > > > (as root) and check dmesg again. > > > > Regards > > > > Oliver -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
