On Sat, 23 Aug 2003, Kurt Wall wrote: > Quoth Kevin O'Gorman: > > I don't know what I did the last time I went to adjust my machine's > > clock, but it seems Linux no longer talks nice to the hardware clock. > > Every time I boot, the clock is off by 7 hours, and for my setup > > thats usually once a day (no fault of Linux, I just have to shut this > > off at night). > > > > The system is RH 7.3, and the contents of /etc/sysconfig/clock are > > > > ZONE="America/Los_Angeles" > > UTC=false > > ARC=false > > Do you have an /etc/localtime file? If so, it probably is a symlink > to the actual timezone file.
I do, and it points to /usr/share/zoneinfo/America/LosAngeles, just like it should. > > > I keep the hardware clock in local time because I dual-boot to other > > OS-es once in a while. Here's what it looks like: > > Okay. It seems like you should be able to rerun the timezone > configuration portion of setup and make sure that everything is > copacetic. I've tried some things that may be what you're talking about to no avail. Perhaps if you were more (i.e. very very) specific I could say if I've done that. > > > [EMAIL PROTECTED] rc.d]# /sbin/hwclock -r > > Fri 15 Aug 2003 07:53:56 AM PDT 0.849306 seconds > > [EMAIL PROTECTED] rc.d]# /sbin/hwclock -r --localtime > > Fri 15 Aug 2003 07:54:12 AM PDT 0.268908 seconds > > [EMAIL PROTECTED] rc.d]# /sbin/hwclock -r --utc > > Fri 15 Aug 2003 12:54:18 AM PDT 0.280746 seconds > > [EMAIL PROTECTED] rc.d]# > > hwclock --hctosys (or hwclock -s) should sync the system time > to the the hardware clock. Yes, provided I also use --localtime. That's what worked, but placement of the command is a hack the way I did it. I put it in the start() function of /etc/rc.d/init.d/syslog, and it does not belong there with an unconditional --localtime. > > > However, on each reboot KDE's clock in the panel, and the 'date' > > program both report time as if I used UTC; in the above example > > that was 12:54 AM. > > > > I'm baffled and sleepless in California..... > > Presumably, nptdate (deprecated for "ntpd -q", it appears) should be > able to set your hardware clock to the "right" time so long as you have > an NTP server setup in /etc/ntp.conf. I do not have NTP working on this machine. And I'm not complaining about the HW clock; it's close enough, and I can adjust it to my Wave clock (Naval Observatory time, I think) every so often. Eventually I'll set up NTP, but frankly I want to get this nailed first. > > Kurt > _______________________________________________ Linux-users mailing list [EMAIL PROTECTED] Unsubscribe/Suspend/Etc -> http://www.linux-sxs.org/mailman/listinfo/linux-users