On Sunday 26 August 2001 11:38 pm, burns wrote:
> Well here's a fine kettle of fish, Ollie.
>
> I have installed Suse 7.2 Pro over the weekend and have had to reshuffle
> harddrives a couple of times to accomodate both Windows and the appealing
> but largish Suse install... this is (still) a dual boot system.
>
> Disk 3 was reformatted to EXT2 and not all are being picked up by the
> system (I don't think 2 & 3 are). I can edit the fstab file, but how do I
> know which drive is actually now which device, when the devices listed are
> not updating, not all of them are being listed and the fstab listing no
> longer matches the current reality?
>
> Here are the facts:
>
> System Details:
> - ABit BP6 Mainboard
> - Dual Celeron CPUs
> - 512 MB SDRAM
> - Creative Nvidia TNT2 Ultra graphics card
> - Soundblaster Live Value sound card
> - Disk 1, Master on primary EIDE, 9Gb Fat32 Primary for Windows, 10Gb for
> Linux with default Suse install partions (boot, swap & /)
> - CDROM, Acer 50x ATAPI = slave on primary EIDE
> - Disk 2, Master on secondary EIDE, 13.2Gb EXT2 for Linux storage
> - Disk 3, Slave on secondary EIDE, 4Gb fat32 Primary for Windows storage
> - Disk 4, Master on first ATA66 UDMA channel, 13Gb fat32 split into
> approximately two logical 6Gb drives/partitions.
>
> Following is result of df:
> �burns@burns:~ > df -h
> Filesystem � � � � � �Size �Used Avail Use% Mounted on
> /dev/hda7 � � � � � � �10G �2.9G �7.0G �29% /
> /dev/hda5 � � � � � � �23M �2.5M � 19M �12% /boot
> shmfs � � � � � � � � 942M � � 0 �941M � 0% /dev/shm
>
> Following is fstab file:
> root@burns:/ > cat etc/fstab
> /dev/hda7 � � � / � � � ext2 � �defaults 1 1
> /dev/hda5 � � � /boot � ext2 � �defaults 1 2
> /dev/cdrom � � �/media/cdrom � �auto � �ro,noauto,user,exec 0 0
> devpts �/dev/pts � � � �devpts �defaults 0 0
> /dev/fd0 � � � �/media/floppy � auto � �noauto,user,sync 0 0
> proc � �/proc � proc � �defaults 0 0
> /dev/hda1 � � � /windows/C � � �vfat � �noauto,user 0 0
> /dev/hdd1 � � � /windows/D � � �vfat � �noauto,user 0 0
> /dev/hdf1 � � � /windows/E � � �vfat � �noauto,user 0 0
> /dev/hdf5 � � � /windows/F � � �vfat � �noauto,user 0 0
> /dev/hda6 � � � swap � �swap � �pri=42 0 0
>
> I have another question, but I'll post it as a separate thread.
You can't tell which is which by looking at the partition print of fdisk?
--
+----------------------------------------------------------------------------+
+ Bruce S. Marshall [EMAIL PROTECTED] Bellaire, MI 08/27/01 00:21 +
+----------------------------------------------------------------------------+
Zelman's Rule of Radio Reception:
"Your pocket radio won't pick up the station you want to hear most"
_______________________________________________
http://linux.nf -- [EMAIL PROTECTED]
Archives, Subscribe, Unsubscribe, Digest, Etc
->http://linux.nf/mailman/listinfo/linux-users
