Skippy, Unfortunately, I have no cd burner in this box. Sorry I misread your post.
Best Regards, Keith B. Keith Antoine <[EMAIL PROTECTED]> wrote: >On Sun, 13 Jan 2002 21:40,[EMAIL PROTECTED] scribed: >> Skippy, >> >> This is from my son's box that uses SuSE 7.3 Pro, KDE 2.2.1 Kernel >> 2.4.10-4GB. I DO NOT use hdx=ide-scsi. I have a dvd and a cdrom >> on the box. However, both are eide/atapi: >> >> From /etc/fstab: >> /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 >> /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 >> >> from /dev >> >> /dev/hdb->/dev/cdrom >> /dev/hdd->/dev/dvd >> >> I have no ide-scsi lines in my lilo.conf. Both work flawlessly. >> As you may recall, you sent me some good advice on xine when I >> set this up. I can see movies use either as a cdrom and have >> no srx, scdx, or scsi-emulation setup. I dunno if this helps >> you, but it works well under my suse 7.3 setup. Good luck! >> >> Best regards, > >Keith, >Do you have a burner? When you call cdrecord --scanbus are they 'seen' ?If >not then we are different in that I DO need them to be seen as scsi devices >so as I can burn DAO. From what you say above you have 2 readers and no >recorder, this so? > >-- >Keith Antoine aka 'skippy' >18 Arkana St, The Gap, Queensland 4061 Australia PH:61733002161 >Retired Geriatric, Sometime Electronics Engineer, Knowall, Brain in storage > >_______________________________________________ >Linux-users mailing list >Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users > _______________________________________________ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
