> Message: 1
> Date: Mon, 23 Mar 2009 18:00:06 +0100
> From: Moritz Barsnick <[email protected]>
> Subject: Re: [Linux-uvc-devel] how to get mencoder en
> mplayer working
> with uvc v4l2
> To: linux-uvc development discussions
> <[email protected]>
> Message-ID:
> <[email protected]>
> Content-Type: text/plain; charset=us-ascii
>
> On Fri, Mar 20, 2009 at 17:02:11 +0100, Jelle de Jong
> wrote:
> > Well I used the above command on a non uvc device but
> on a v4l2 usb
> > device that has in the v4l-info command output 720x576
> as maximum mode.
>
> I want to pitch in and confirm. Unlike with a UVC device, a
> V4L2 TV
> device is told to scale/sample its video to 720x576. That
> is _not_
> mencoder's SW scaler, mencoder actually gets 720x576
> from the TV
> device.
>
> BTW, as you have noticed: mplayer and mencoder are picky
> about UVC
> resolutions. It's best if you give them a resolution
> which you are sure
> can be returned, otherwise the result is a bit
> unpredictable.
>
> List your supported resolutions with "luvcview
> -L".
>
> Moritz.
>
Yeah, great! This command shows the supported stuff by the camera and I
remembere that I read the specs when I bought my camera and it said, it's
supporting 640x480 at up to 30fps and 1280x1024 at up to 15fps.
I remembered also that I tested it when I compiled the drivers and the test
program the first time :-D I knew there was something about it
regards
_______________________________________________
Linux-uvc-devel mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
