Hi, On Thursday 24 September 2009 22:49:47 Mitch Trachtenberg wrote: > Hi, > > I'm running Ubuntu with 2.6.28-15.49 generic on a Mac Mini, and having > problems with a new HP Elite Autofocus webcam GX607AA.
Could you send me the lsusb -v output for your device ? Thanks. > The device shows up in dmesg output, and appears to be recognized by > luvcview, but give me a black screen. When I try to quit luvcview, it > hangs. When I run camstream I also get the camera recognized but > blackscreen; when I try to exit, I get a message that it's waiting for the > capture thread to terminate. kill -9 to both. I'm using the Ubuntu > uvccapture 0.5-1 and luvcview 1:0.2.4-2 packages. luvcview -L does show > that whatever it's talking to is willing to send at up to about 3MP. > > Any suggestions? (The shutter is open. :)) I'm providing output below and > would be happy to send anything additional that might be of use. It sounds like the uvcvideo driver doesn't get enough data from the webcam. Could you set the trace parameter to 255, start luvcview and send me the content of the kernel log ? The driver will get pretty verbose, so you should kill luvcview within a few seconds otherwise the kernel log will likely overflow (please paste the content of the log to pastebin.com, it would be a bit too big for the list). If the log overflows, get it from /var/log/whatever instead of dmesg. -- Regards, Laurent Pinchart _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
