On 02/02/2015 05:02 AM, Johannes Berg wrote:
On Fri, 2015-01-30 at 14:53 -0800, Peter Oh wrote:
I admit that I/O ordering and posted write are looked different in
theory and at glance since posted write could be related cache
invalidate.
But wmb are still related to both.
As I addressed wmb uses dsb (in arm arch) and here is the description of
arm architecture.
* DSB drains write buffer.
* DSB is architecturally defined to include all cache, TLB and branch
prediction maintenance operations as well as explicit memory operations
These are the reasons why I mentioned wmb does both.
* captured from ARMv7 Architecture Manual
--- Notes ---
Historically, this operation was referred to as Drain Write Buffer or
Data Write Barrier (DWB). From ARMv6, these
names and the use of DWB were deprecated in favor of the new Data
Synchronization Barrier name and DSB
abbreviation. DSB better reflects the functionality provided from ARMv6,
because DSB is architecturally defined
to include all cache, TLB and branch prediction maintenance operations
as well as explicit memory operations
--- A DSB completes when: ---
? all explicit memory accesses that are observed by Pe before the DSB is
executed, are of the required access
types, and are from observers in the same required shareability domain
as Pe, are complete for the set of
observers in the required shareability domain.
? if the required accesses types of the DSB is reads and writes, all
cache and branch predictor maintenance
operations issued by Pe before the DSB are complete for the required
shareability domain.
? if the required accesses types of the DSB is reads and writes, all TLB
maintenance operations issued by Pe
before the DSB are complete for the required shareability domain.
--------------
I cannot read from this in any way that it can post writes to the PCIe
bus. In fact, architecturally, I cannot think of any reason how it even
could do that from the CPU.
Furthermore this is the comparison of the compiled assembly code between
ath10k_pci_read32 and wmb.
ath10k_pci_read32()
bac: e5932008 ldr r2, [r3, #8]
bb0: f57ff04f dsb sy
bb4: e2883d52 add r3, r8, #5248 ; 0x1480
bb8: e283303c add r3, r3, #60 ; 0x3c
bbc: e593300c ldr r3, [r3, #12]
bc0: e2833a09 add r3, r3, #36864 ; 0x9000
wmb();
b9c: f57ff04e dsb st
ath10k_pci_read32 does register operation except dsb and there is no
cache invalidate related commands.
I don't think this is relevant. The question is "what are you trying to
achieve".
So that if wmb is not enough for the purpose then ath10k_pci_read32 is
also not enough for that.
Also refer the section "ACQUIRES VS I/O ACCESSES" in
memory-barriers.txt.
It gives an example with PCI bridge and introduces readl as an
alternative method to mmiowb which weaker form of wmb.
Please give your opinion.
Again - the question is - what are you trying to achieve?
The code (as it is before your patch) implies that it's trying to make
sure that before it continues, any previous writes to the PCIe device's
registers are posted. The only way to ensure that is to do a read to the
registers, as the code does now.
Do you know how the read ensure that although the read code does not
check the return value?
Can you explain how a read ensures that posted write reaches PCIe device?
What you're describing is something else entirely - you're describing a
way to make sure that some data was flushed out to DRAM from the CPU
caches.
These two things are not related in any way.
In an interrupt routine, it would make sense to ensure that the write
was posted (e.g. to mask interrupts, or to acknowledge them, or similar,
before the routine can be re-invoked.)
To me, flushing memory writes to DRAM makes less sense in an interrupt
handlers unless the device was somehow using DMA to coordinate
interrupts [1], which seems unlikely but I haven't checked.
Anyway - I have no particular interest in this discussion, I was merely
trying to help you out with this :) You can make whatever change you
want, of course :P
johannes
[1] incidentally, our device [iwlwifi] does in fact do something like
that, but it's read-only for the driver so no need for such a thing
either
_______________________________________________
ath10k mailing list
ath...@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
Thanks,
Peter
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
