[RFC v2 08/10] ath10k: add QCA9377 usb hw_param item

[Erik Stromdahl]

Hardware parameters for QCA9377 usb devices.

Signed-off-by: Erik Stromdahl <erik.stromd...@gmail.com>
---
 drivers/net/wireless/ath/ath10k/core.c | 23 +++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  1 +
 2 files changed, 24 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c 
b/drivers/net/wireless/ath/ath10k/core.c
index c20b97b..dc8ea5e 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -299,6 +299,29 @@ static const struct ath10k_hw_params 
ath10k_hw_params_list[] = {
                .spectral_bin_discard = 0,
        },
        {
+               .id = QCA9377_HW_1_1_DEV_VERSION,
+               .dev_id = QCA9377_1_0_DEVICE_ID,
+               .name = "qca9377 hw1.1 usb",
+               .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
+               .uart_pin = 6,
+               .otp_exe_param = 0,
+               .channel_counters_freq_hz = 88000,
+               .max_probe_resp_desc_thres = 0,
+               .cal_data_len = 8124,
+               .fw = {
+                       .dir = QCA9377_HW_1_0_FW_DIR,
+                       .board = QCA9377_HW_1_0_BOARD_DATA_FILE_USB,
+                       .board_size = QCA9377_BOARD_DATA_SZ,
+                       .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
+               },
+               .hw_ops = &qca988x_ops,
+               .decap_align_bytes = 4,
+               .max_num_peers = TARGET_QCA9377_HL_NUM_PEERS,
+               .is_high_latency = true,
+               .bus = ATH10K_BUS_USB,
+               .start_once = true,
+       },
+       {
                .id = QCA4019_HW_1_0_DEV_VERSION,
                .dev_id = 0,
                .name = "qca4019 hw1.0",
diff --git a/drivers/net/wireless/ath/ath10k/hw.h 
b/drivers/net/wireless/ath/ath10k/hw.h
index f733e73..cc3d0eb 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -127,6 +127,7 @@ enum qca9377_chip_id_rev {
 /* QCA9377 1.0 definitions */
 #define QCA9377_HW_1_0_FW_DIR          ATH10K_FW_DIR "/QCA9377/hw1.0"
 #define QCA9377_HW_1_0_BOARD_DATA_FILE "board.bin"
+#define QCA9377_HW_1_0_BOARD_DATA_FILE_USB "board-usb.bin"
 #define QCA9377_HW_1_0_PATCH_LOAD_ADDR 0x1234
 
 /* QCA4019 1.0 definitions */
-- 
2.7.4