On 2017-06-13 19:38, Peter Oh wrote:
On 06/12/2017 08:03 AM, Erik Stromdahl wrote:Add HTT TX function for HL interfaces. Intended for SDIO and USB. Signed-off-by: Erik Stromdahl <erik.stromd...@gmail.com> --- diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 48418f9..c5fd803 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -3572,7 +3572,10 @@ static int ath10k_mac_tx_submit(struct ath10k *ar, switch (txpath) { case ATH10K_MAC_TX_HTT: - ret = ath10k_htt_tx(htt, txmode, skb); + if (ar->is_high_latency)Can we use function pointers at initial time to avoid condition check at hot path? I'm afraid adding more lines on hot path.
I haven't made any comparison of assembly code between if-paths or function pointers, but since most architectures have conditional instructions I don't think the penalty is that big (if there is any penalty at all). There are plenty of other condition checks in the RX path (mac80211 is full of them), so I don't really see this as an issue. That being said, any improvement is always welcome (even micro optimizations if they are beneficial). I will think about this and see if adding function pointers can be done in a nice way.
