Hi Simon, > Simon Shields <si...@lineageos.org> hat am 4. November 2017 um 14:24 > geschrieben: > > > Some boards use an external 32khz clock for low-power > mode timing. Make sure the clock is powered on while the chipset > is active. > > Signed-off-by: Simon Shields <si...@lineageos.org> > --- > .../devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt | 2 ++ > drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h | 2 ++ > drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c | 5 +++++ > drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 10 > ++++++++++ > 4 files changed, 19 insertions(+) > > diff --git > a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt > b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt > index b2bd4704f859..37add5e29272 100644 > --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt > +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt > @@ -17,6 +17,8 @@ Optional properties: > When not specified the device will use in-band SDIO interrupts. > - interrupt-names : name of the out-of-band interrupt, which must be set > to "host-wake". > + - clocks : external 32khz clock > + - clock-names : name of the external 32khz clock, must be "32khz"
sorry for the nitpicking, but according to the datasheet [1] it's 32768 Hz. Apart from that i suggest to use a functional name for the clock like "low_power" or something else, which is more flexible and future-proof. Btw this binding needs to be a separate patch, which should go to the devicetree guys. [1] - http://www.cypress.com/file/298706/download > > Example: > > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h > index a62f8e70b320..2e7fabae81d3 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h > @@ -51,6 +51,7 @@ extern struct brcmf_mp_global_t brcmf_mp_global; > * @roamoff: Firmware roaming off? > * @ignore_probe_fail: Ignore probe failure. > * @country_codes: If available, pointer to struct for translating country > codes > + * @clk: External 32khz clock, if present. > * @bus: Bus specific platform data. Only SDIO at the mmoment. > */ > struct brcmf_mp_device { > @@ -60,6 +61,7 @@ struct brcmf_mp_device { > bool roamoff; > bool ignore_probe_fail; > struct brcmfmac_pd_cc *country_codes; > + struct clk *clk; > union { > struct brcmfmac_sdio_pd sdio; > } bus; > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c > index aee6e5937c41..46f42a2c3d2b 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c > @@ -13,6 +13,7 @@ > * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN > * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. > */ > +#include <linux/clk.h> > #include <linux/init.h> > #include <linux/of.h> > #include <linux/of_irq.h> > @@ -39,6 +40,10 @@ void brcmf_of_probe(struct device *dev, enum > brcmf_bus_type bus_type, > if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0) > sdio->drive_strength = val; > > + settings->clk = devm_clk_get(dev, "32khz"); > + if (IS_ERR(settings->clk)) > + settings->clk = NULL; I cannot recommend this, please look at the thread here [2]. Thanks [2] - https://marc.info/?l=linux-arm-kernel&m=150980353025665&w=2 > + > /* make sure there are interrupts defined in the node */ > if (!of_find_property(np, "interrupts", NULL)) > return; > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c > b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c > index 613caca7dc02..f4ceca6dbe74 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c > @@ -14,6 +14,7 @@ > * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. > */ > > +#include <linux/clk.h> > #include <linux/types.h> > #include <linux/atomic.h> > #include <linux/kernel.h> > @@ -3853,6 +3854,11 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) > brcmf_err("Failed to get device parameters\n"); > goto fail; > } > + > + /* enable external 32khz clock, if present */ > + if (sdiodev->settings->clk) > + clk_prepare_enable(sdiodev->settings->clk); > + > /* platform specific configuration: > * alignments must be at least 4 bytes for ADMA > */ > @@ -4270,6 +4276,10 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus) > } > brcmf_chip_detach(bus->ci); > } > + > + if (bus->sdiodev->settings->clk) > + clk_disable_unprepare(bus->sdiodev->settings->clk); > + > if (bus->sdiodev->settings) > brcmf_release_module_param(bus->sdiodev->settings); > > -- > 2.15.0 >
