Stefan Wahren <stefan.wah...@i2se.com> writes: >> Simon Shields <si...@lineageos.org> hat am 4. November 2017 um 14:24 >> geschrieben: >> >> >> Some boards use an external 32khz clock for low-power >> mode timing. Make sure the clock is powered on while the chipset >> is active. >> >> Signed-off-by: Simon Shields <si...@lineageos.org> >> --- >> .../devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt | 2 ++ >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h | 2 ++ >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c | 5 +++++ >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 10 >> ++++++++++ >> 4 files changed, 19 insertions(+) >> >> diff --git >> a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt >> b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt >> index b2bd4704f859..37add5e29272 100644 >> --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt >> +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt >> @@ -17,6 +17,8 @@ Optional properties: >> When not specified the device will use in-band SDIO interrupts. >> - interrupt-names : name of the out-of-band interrupt, which must be set >> to "host-wake". >> + - clocks : external 32khz clock >> + - clock-names : name of the external 32khz clock, must be "32khz" > > sorry for the nitpicking, but according to the datasheet [1] it's > 32768 Hz. Apart from that i suggest to use a functional name for the > clock like "low_power" or something else, which is more flexible and > future-proof. > > Btw this binding needs to be a separate patch, which should go to the > devicetree guys.
Previously I have applied binding documentation changes which the DT maintainers have acked, that's why I specifically asked to Cc device tree list. Has something changed? -- Kalle Valo
