(adding linux-wireless for a cfg80211 question) Peter Oh <peter...@bowerswilkins.com> writes: > On 11/08/2017 04:49 AM, Harms, Hannes wrote: > >> I found a solution for the problem: >> >> When joining the mesh with beacon interval set to 100 >> both mesh and ap interface are coming up. >> >> > iw mesh0 mesh join my_mesh beacon-interval 100 >> >> The default beacon interval is 1000 for mesh interfaces. >> It seems that QCA9880 is not working >> with different beacon intervals for ap + mesh. > > Good to hear that working. But mesh beacon interval 1000 which is > default value should work. Any mesh beacon intervals of multiple of AP > beacon intervals are supposed to work. > > (In other words, mesh beacon intervals that are not aligned by >multiple of AP beacon intervals won't work). These are valid for both >of QCA9880 and QCA4019 as far as I know.
It would be nice if ath10k could print a warning if the beacon intervals are not compatible. Or is there a way to enforce the beacon interval with help of cfg80211 or mac80211? -- Kalle Valo