On 11/15/2017 11:27 AM, Kalle Valo wrote:
Arend van Spriel <arend.vanspr...@broadcom.com> writes:
On 11/15/2017 11:01 AM, Kalle Valo wrote:
(adding linux-wireless for a cfg80211 question)
Peter Oh <peter...@bowerswilkins.com> writes:
On 11/08/2017 04:49 AM, Harms, Hannes wrote:
I found a solution for the problem:
When joining the mesh with beacon interval set to 100
both mesh and ap interface are coming up.
iw mesh0 mesh join my_mesh beacon-interval 100
The default beacon interval is 1000 for mesh interfaces.
It seems that QCA9880 is not working
with different beacon intervals for ap + mesh.
Good to hear that working. But mesh beacon interval 1000 which is
default value should work. Any mesh beacon intervals of multiple of AP
beacon intervals are supposed to work.
(In other words, mesh beacon intervals that are not aligned by
multiple of AP beacon intervals won't work). These are valid for both
of QCA9880 and QCA4019 as far as I know.
It would be nice if ath10k could print a warning if the beacon intervals
are not compatible. Or is there a way to enforce the beacon interval
with help of cfg80211 or mac80211?
There is beacon interval checking in utility function
cfg80211_check_combinations() ->
cfg80211_iter_combinations() -> cfg80211_calculate_bi_data() for that.
Nice, that looks useful. Thanks for the tip.
Initally was added by:
commit 0c317a02ca982ca093e71bf07cb562265ba40032
Author: Purushottam Kushwaha <pkush...@qti.qualcomm.com>
Date: Wed Oct 12 18:26:51 2016 +0530
cfg80211: support virtual interfaces with different beacon intervals
And last touched by Johannes:
commit 4c8dea638c16141adb046fd2e0cab51dfe43650c
Author: Johannes Berg <johannes.b...@intel.com>
Date: Fri Oct 21 14:25:13 2016 +0200
cfg80211: validate beacon int as part of iface combinations
The last commit message has some info on how to use in case of AP/mesh.
However, it seems brcmfmac is the only user of that function according
to lxr (or elixir).
git-grep says the same.
Yeah. git-grep has not sunk in my system yet ;-)
Regards,
Arend
