Am 26.02.2018 um 10:54 schrieb Kalle Valo:
Bas Vermeulen <bverm...@blackstar.nl> writes:
A random (little endian eeprom'd) ar9278 card didn't work on my
PowerMac G5 without allowing the driver to byte-swap the eeprom.
Introduce a module parameter endian_check to allow this to happen,
and the PCIe card to function correctly on BE powerpc.
Signed-off-by: Bas Vermeulen <bverm...@blackstar.nl>
---
drivers/net/wireless/ath/ath9k/init.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/init.c
b/drivers/net/wireless/ath/ath9k/init.c
index fa58a32227f5..421039dc060a 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -67,6 +67,9 @@ static int ath9k_ps_enable;
module_param_named(ps_enable, ath9k_ps_enable, int, 0444);
MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave");
+static int ath9k_endian_check;
+module_param_named(endian_check, ath9k_endian_check, int, 0444);
+MODULE_PARM_DESC(endian_check, "Check EEPROM for endianness compatibility");
#ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
int ath9k_use_chanctx;
@@ -587,7 +590,8 @@ static int ath9k_of_init(struct ath_softc *sc)
ether_addr_copy(common->macaddr, mac);
ah->ah_flags &= ~AH_USE_EEPROM;
- ah->ah_flags |= AH_NO_EEP_SWAP;
+ if (!ath9k_endian_check)
+ ah->ah_flags |= AH_NO_EEP_SWAP;
A bit annoying to have a module parameter, isn't there any automatic way
to detect/try this? But on the other hand I guess this isn't a common
problem as nobody has reported this before?
There is a way by simply checking the eeprom magic on this chipset
--
Mit freundlichen Grüssen / Regards
Sebastian Gottschall / CTO
NewMedia-NET GmbH - DD-WRT
Firmensitz: Stubenwaldallee 21a, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473
Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: s.gottsch...@dd-wrt.com
Tel.: +496251-582650 / Fax: +496251-5826565
