From: Quanyang Wang <quanyang.w...@windriver.com> Set "status" properties of pfe relevant device nodes to be "okay" to enable these devices.
Signed-off-by: Quanyang Wang <quanyang.w...@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfi...@gmail.com> --- .../boot/dts/freescale/s32g274a-aptiv.dts | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/s32g274a-aptiv.dts b/arch/arm64/boot/dts/freescale/s32g274a-aptiv.dts index d711a07e25698..4201443d81611 100644 --- a/arch/arm64/boot/dts/freescale/s32g274a-aptiv.dts +++ b/arch/arm64/boot/dts/freescale/s32g274a-aptiv.dts @@ -39,6 +39,48 @@ &usbotg { status = "okay"; }; +&pfe { + status = "okay"; +}; + +&pfe_mdio0 { + status = "okay"; +}; + +&pfe_mdio1 { + /* unused */ + status = "okay"; +}; + +&pfe_mdio2 { + /* unused */ + status = "okay"; +}; + +&pfe_netif0 { + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pfe_netif1 { + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pfe_netif2 { + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + &gmac0 { status = "okay"; phy-mode = "rgmii"; -- 2.36.1
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#12292): https://lists.yoctoproject.org/g/linux-yocto/message/12292 Mute This Topic: https://lists.yoctoproject.org/mt/97796773/21656 Group Owner: linux-yocto+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/linux-yocto/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-