> -----Original Message----- > From: Darren Hart [mailto:dvh...@linux.intel.com] > Sent: Wednesday, February 19, 2014 3:12 AM > To: Ong, Boon Leong; linux-yocto@yoctoproject.org > Subject: Re: [linux-yocto] [PATCH 1/2] baytrail: Add feature/soc/baytrail > > On 2/16/14, 18:27, "Ong, Boon Leong" <boon.leong....@intel.com> wrote: > > >>+CONFIG_SND_SOC=m > >>+CONFIG_SND_DESIGNWARE_I2S=m > >>+CONFIG_SND_SOC_I2C_AND_SPI=m > >>+CONFIG_SND_SIMPLE_CARD=m > >Are the above configs meant to enable a specific skus of BYT with > >designware I2S? > >For BYT-I, the ASoC is not upstream yet. > > > This will be needed when it is supported right? > > What is missing here? > I am commenting from BYT-I perspective below: CONFIG_SND_SOC=m : yes it is needed. CONFIG_SND_DESIGNWARE_I2S, CONFIG_SND_SOC_I2C_AND_SPI & CONFIG_SND_SIMPLE_CARD: are not needed for BYT-I sku. Since they are still working their way up-stream, I can only get the correct CONFIGS once the drivers are available.
> -- > Darren Hart > Yocto Project - Linux Kernel > Intel Open Source Technology Center > > > _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto