> -----Original Message----- > From: Bruce Ashfield [mailto:bruce.ashfi...@windriver.com] > Sent: 08 April, 2014 12:40 PM > To: Chang, Rebecca Swee Fun; linux-yocto@yoctoproject.org; Darren Hart > Subject: Re: [linux-yocto] [PATCH 00/29] Create new feature branch for > Valley Island BSP > > On 2014-04-07, 8:28 PM, Chang, Rebecca Swee Fun wrote: > > > > > >> -----Original Message----- > >> From: Bruce Ashfield [mailto:bruce.ashfi...@windriver.com] > >> Sent: 08 April, 2014 3:04 AM > >> To: Chang, Rebecca Swee Fun; linux-yocto@yoctoproject.org; Darren > >> Hart > >> Subject: Re: [linux-yocto] [PATCH 00/29] Create new feature branch > >> for Valley Island BSP > >> > >> On 14-04-07 11:17 AM, rebecca.swee.fun.ch...@intel.com wrote: > >>> From: Chang Rebecca Swee Fun <rebecca.swee.fun.ch...@intel.com> > >>> > >>> Hi all, > >> > >> Adding Darren (just in case he missed this). > >> > >>> > >>> Here is a request to create feature branch to host Valley Island PCI > >>> enumerated LPSS I/O device drivers. We expect the patch series to be > >>> removed over time. This will give us time to stage a working code > >>> while we are working on up-stream commits to mainline and eventually > >>> back-port them into LTS/LTSI. As per previous internal discussion, > >>> we think that feature branch is a right approach for ISG. > >> > >> The content looks reasonable to me, there's a mix of mainline > >> backports and new patches, but nothing jumps out as "not belonging" > >> on the feature branch. > >> > >> Some of the mainline backports would probably be better merged to > >> standard/base, and made available to all boards, but I won't insist > >> (unless Darren wants to insist instead). > > > > I agree on that. When the patches are up in mainline, we will do the > mainline backports into standard/base. > > Some of the patches are already referencing mainline commits. Is there any > strong reason to delay on them ?
Thanks for the reminder. Since we have patches available in mainline, I will do the rebase and have the feature branch updated. > > >> > >>> > >>> This new branch is named: isg-1.0 with -1.0 suffix as the initial > >>> version of this feature branch. This feature branch was branched out > >>> from linux-yocto-3.10 standard/base at the commit: > >> > >> Did we want to give it at least part of a name that indicates the > >> purpose as well ? i.e. isg-io-1.0. > > > > After some brief discussion, we decided to use the name: valleyisland-io- > 1.0. > > That works for me. > > Bruce > > > > > Thanks. > > > > Rebecca > > > >> > >> Cheers, > >> > >> Bruce > >> > >>> > >>> 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee > >>> minnowboard-keys: Bind MinnowBoard buttons to arrow keys > >>> > >>> This branch was built tested to ensure no merge issues during build time. > >>> The PCI enumerated I/O drivers are sanity tested by checking > >>> "dmesg", "lspci -k" and "lsmod". > >>> > >>> Please help to create a new branch named isg-1.0 in linux-yocto-3.10 > >>> and pull the entire patch series into the feature branch. > >>> > >>> Thanks. > >>> > >>> Rebecca > >>> > >>> The following changes since commit > >> 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee: > >>> > >>> minnowboard-keys: Bind MinnowBoard buttons to arrow keys > >>> (2014-02-12 00:08:25 -0500) > >>> > >>> are available in the git repository at: > >>> > >>> git://git.yoctoproject.org/linux-yocto-contrib rebeccas/isg-1.0 > >>> > >>> http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebe > >>> cc > >>> as/isg-1.0 > >>> > >>> Alan Stern (1): > >>> usb: gadget: don't fail when DMA isn't present > >>> > >>> Chang, Rebecca Swee Fun (1): > >>> i2c: i801: Enable BYT SMBUS support > >>> > >>> Chew, Chiau Ee (14): > >>> x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS > >>> x86/byt: enable board file for BYT LPSS PCI mode > >>> dma: dw: Fix Intel MID DMA driver and Designware DMA driver loading > >>> sequence > >>> dma: dw: Implement suspend/resume callbacks > >>> serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud > rate > >>> i2c: designware-pci: Add support for Intel BayTrail LPSS I2C > >>> i2c: designware-pcidrv: Add 10-bit addressing mode functionality > >>> i2c: designware-pcidrv: Option to set custom HCNT, LCNT and SDA > value > >>> spi/pxa2xx-pci: Add support for Intel BYT SPI > >>> spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds > >>> sdhc: acpi: Fix SDCARD card detection failure > >>> pwm: lpss: Enable BYT PCI mode PWM > >>> pwm: lpss: Fix base_unit calculation > >>> ACPI / LPSS: Add BYT ACPI mode PWM > >>> > >>> Chew, Kean Ho (5): > >>> mmc: sdhci: Force BYT SDCARD host to run with SDR25 mode > >>> pinctrl-baytrail: add function mux checking in gpio pin request > >>> pinctrl-baytrail: unmap interrupt when free the gpio pin > >>> pinctrl-baytrail: enable platform device in the absent of ACPI > >>> enumeration > >>> pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on > >>> non-ACPI system > >>> > >>> Felipe Balbi (1): > >>> usb: gadget: udc-core: move sysfs_notify() to a workqueue > >>> > >>> H Hartley Sweeten (1): > >>> pwm: Add sysfs interface > >>> > >>> Heikki Krogerus (2): > >>> serial: 8250: don't change the fifo trigger level when using dma > >>> serial: 8250_pci: add support for Intel BayTrail > >>> > >>> Maurice Petallo (3): > >>> usb: dwc3: pci: Enable/disable ulpi phy refclk > >>> x86/byt: Fix device name string for clkdev registration > >>> mmc: sdhci: Fix continuous warning prints in ISR if shared > >>> interrupt > >>> > >>> Mika Westerberg (1): > >>> pwm: add support for Intel Low Power Subsystem PWM > >>> > >>> Documentation/ABI/testing/sysfs-class-pwm | 79 +++++++ > >>> Documentation/pwm.txt | 37 +++ > >>> arch/x86/Kconfig | 11 +- > >>> arch/x86/platform/Makefile | 3 + > >>> arch/x86/platform/byt/Makefile | 1 + > >>> arch/x86/platform/byt/byt-board.c | 84 +++++++ > >>> drivers/acpi/acpi_lpss.c | 11 + > >>> drivers/dma/Makefile | 2 +- > >>> drivers/dma/dw/pci.c | 36 +++ > >>> drivers/i2c/busses/Makefile | 2 +- > >>> drivers/i2c/busses/i2c-designware-pcidrv.c | 126 +++++++++- > >>> drivers/i2c/busses/i2c-i801.c | 2 + > >>> drivers/mmc/host/sdhci-acpi.c | 7 +- > >>> drivers/mmc/host/sdhci-pci.c | 3 +- > >>> drivers/mmc/host/sdhci.c | 17 +- > >>> drivers/pinctrl/Kconfig | 19 +- > >>> drivers/pinctrl/Makefile | 1 + > >>> drivers/pinctrl/pinctrl-baytrail-dev.c | 159 +++++++++++++ > >>> drivers/pinctrl/pinctrl-baytrail.c | 76 +++++- > >>> drivers/pwm/Kconfig | 21 ++ > >>> drivers/pwm/Makefile | 3 + > >>> drivers/pwm/core.c | 25 +- > >>> drivers/pwm/pwm-lpss-pci.c | 118 ++++++++++ > >>> drivers/pwm/pwm-lpss.c | 186 +++++++++++++++ > >>> drivers/pwm/pwm-lpss.h | 19 ++ > >>> drivers/pwm/sysfs.c | 352 > >> ++++++++++++++++++++++++++++ > >>> drivers/spi/Kconfig | 5 +- > >>> drivers/spi/spi-pxa2xx-dma.c | 2 +- > >>> drivers/spi/spi-pxa2xx-pci.c | 85 +++++-- > >>> drivers/tty/serial/8250/8250_core.c | 2 +- > >>> drivers/tty/serial/8250/8250_dw.c | 43 ++++ > >>> drivers/tty/serial/8250/8250_pci.c | 145 ++++++++++++ > >>> drivers/usb/dwc3/dwc3-pci.c | 23 ++ > >>> drivers/usb/gadget/udc-core.c | 18 +- > >>> include/linux/mmc/sdhci.h | 2 + > >>> include/linux/pinctrl/pinctrl-byt.h | 16 ++ > >>> include/linux/pwm.h | 29 ++- > >>> include/linux/usb/gadget.h | 4 + > >>> 38 files changed, 1731 insertions(+), 43 deletions(-) > >>> create mode 100644 Documentation/ABI/testing/sysfs-class-pwm > >>> create mode 100644 arch/x86/platform/byt/Makefile > >>> create mode 100644 arch/x86/platform/byt/byt-board.c > >>> create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c > >>> create mode 100644 drivers/pwm/pwm-lpss-pci.c > >>> create mode 100644 drivers/pwm/pwm-lpss.c > >>> create mode 100644 drivers/pwm/pwm-lpss.h > >>> create mode 100644 drivers/pwm/sysfs.c > >>> create mode 100644 include/linux/pinctrl/pinctrl-byt.h > >>> > > -- _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto
