Thanks Nitin. I will work with the dev team to make our feature branch in better shape.
Rebecca > -----Original Message----- > From: Kamble, Nitin A > Sent: 10 April, 2014 8:41 AM > To: Chang, Rebecca Swee Fun; linux-yocto@yoctoproject.org > Subject: Re: [linux-yocto] [PATCH 00/29] Create new feature branch for > Valley Island BSP > > > On 4/7/2014 8:17 AM, rebecca.swee.fun.ch...@intel.com wrote: > > From: Chang Rebecca Swee Fun <rebecca.swee.fun.ch...@intel.com> > > > > Hi all, > > > > Here is a request to create feature branch to host Valley Island PCI > > enumerated LPSS I/O device drivers. We expect the patch series to be > > removed over time. This will give us time to stage a working code > > while we are working on up-stream commits to mainline and eventually > > back-port them into LTS/LTSI. As per previous internal discussion, we > > think that feature branch is a right approach for ISG. > > > > This new branch is named: isg-1.0 with -1.0 suffix as the initial > > version of this feature branch. This feature branch was branched out > > from linux-yocto-3.10 standard/base at the commit: > > > > 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee > > minnowboard-keys: Bind MinnowBoard buttons to arrow keys > > > > This branch was built tested to ensure no merge issues during build time. > > The PCI enumerated I/O drivers are sanity tested by checking "dmesg", > > "lspci -k" and "lsmod". > > > > Please help to create a new branch named isg-1.0 in linux-yocto-3.10 > > and pull the entire patch series into the feature branch. > > > > Thanks. > > > > Rebecca > Hi Rebecca, > I have sent my review feedback by email to many of the commits. The > commits which did not get feedback from me, are already in good shape. > > Thanks, > Nitin > > > The following changes since commit > 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee: > > > > minnowboard-keys: Bind MinnowBoard buttons to arrow keys > > (2014-02-12 00:08:25 -0500) > > > > are available in the git repository at: > > > > git://git.yoctoproject.org/linux-yocto-contrib rebeccas/isg-1.0 > > > > http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebecc > > as/isg-1.0 > > > > Alan Stern (1): > > usb: gadget: don't fail when DMA isn't present > > > > Chang, Rebecca Swee Fun (1): > > i2c: i801: Enable BYT SMBUS support > > > > Chew, Chiau Ee (14): > > x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS > > x86/byt: enable board file for BYT LPSS PCI mode > > dma: dw: Fix Intel MID DMA driver and Designware DMA driver loading > > sequence > > dma: dw: Implement suspend/resume callbacks > > serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate > > i2c: designware-pci: Add support for Intel BayTrail LPSS I2C > > i2c: designware-pcidrv: Add 10-bit addressing mode functionality > > i2c: designware-pcidrv: Option to set custom HCNT, LCNT and SDA value > > spi/pxa2xx-pci: Add support for Intel BYT SPI > > spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds > > sdhc: acpi: Fix SDCARD card detection failure > > pwm: lpss: Enable BYT PCI mode PWM > > pwm: lpss: Fix base_unit calculation > > ACPI / LPSS: Add BYT ACPI mode PWM > > > > Chew, Kean Ho (5): > > mmc: sdhci: Force BYT SDCARD host to run with SDR25 mode > > pinctrl-baytrail: add function mux checking in gpio pin request > > pinctrl-baytrail: unmap interrupt when free the gpio pin > > pinctrl-baytrail: enable platform device in the absent of ACPI > > enumeration > > pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on > > non-ACPI system > > > > Felipe Balbi (1): > > usb: gadget: udc-core: move sysfs_notify() to a workqueue > > > > H Hartley Sweeten (1): > > pwm: Add sysfs interface > > > > Heikki Krogerus (2): > > serial: 8250: don't change the fifo trigger level when using dma > > serial: 8250_pci: add support for Intel BayTrail > > > > Maurice Petallo (3): > > usb: dwc3: pci: Enable/disable ulpi phy refclk > > x86/byt: Fix device name string for clkdev registration > > mmc: sdhci: Fix continuous warning prints in ISR if shared > > interrupt > > > > Mika Westerberg (1): > > pwm: add support for Intel Low Power Subsystem PWM > > > > Documentation/ABI/testing/sysfs-class-pwm | 79 +++++++ > > Documentation/pwm.txt | 37 +++ > > arch/x86/Kconfig | 11 +- > > arch/x86/platform/Makefile | 3 + > > arch/x86/platform/byt/Makefile | 1 + > > arch/x86/platform/byt/byt-board.c | 84 +++++++ > > drivers/acpi/acpi_lpss.c | 11 + > > drivers/dma/Makefile | 2 +- > > drivers/dma/dw/pci.c | 36 +++ > > drivers/i2c/busses/Makefile | 2 +- > > drivers/i2c/busses/i2c-designware-pcidrv.c | 126 +++++++++- > > drivers/i2c/busses/i2c-i801.c | 2 + > > drivers/mmc/host/sdhci-acpi.c | 7 +- > > drivers/mmc/host/sdhci-pci.c | 3 +- > > drivers/mmc/host/sdhci.c | 17 +- > > drivers/pinctrl/Kconfig | 19 +- > > drivers/pinctrl/Makefile | 1 + > > drivers/pinctrl/pinctrl-baytrail-dev.c | 159 +++++++++++++ > > drivers/pinctrl/pinctrl-baytrail.c | 76 +++++- > > drivers/pwm/Kconfig | 21 ++ > > drivers/pwm/Makefile | 3 + > > drivers/pwm/core.c | 25 +- > > drivers/pwm/pwm-lpss-pci.c | 118 ++++++++++ > > drivers/pwm/pwm-lpss.c | 186 +++++++++++++++ > > drivers/pwm/pwm-lpss.h | 19 ++ > > drivers/pwm/sysfs.c | 352 > ++++++++++++++++++++++++++++ > > drivers/spi/Kconfig | 5 +- > > drivers/spi/spi-pxa2xx-dma.c | 2 +- > > drivers/spi/spi-pxa2xx-pci.c | 85 +++++-- > > drivers/tty/serial/8250/8250_core.c | 2 +- > > drivers/tty/serial/8250/8250_dw.c | 43 ++++ > > drivers/tty/serial/8250/8250_pci.c | 145 ++++++++++++ > > drivers/usb/dwc3/dwc3-pci.c | 23 ++ > > drivers/usb/gadget/udc-core.c | 18 +- > > include/linux/mmc/sdhci.h | 2 + > > include/linux/pinctrl/pinctrl-byt.h | 16 ++ > > include/linux/pwm.h | 29 ++- > > include/linux/usb/gadget.h | 4 + > > 38 files changed, 1731 insertions(+), 43 deletions(-) > > create mode 100644 Documentation/ABI/testing/sysfs-class-pwm > > create mode 100644 arch/x86/platform/byt/Makefile > > create mode 100644 arch/x86/platform/byt/byt-board.c > > create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c > > create mode 100644 drivers/pwm/pwm-lpss-pci.c > > create mode 100644 drivers/pwm/pwm-lpss.c > > create mode 100644 drivers/pwm/pwm-lpss.h > > create mode 100644 drivers/pwm/sysfs.c > > create mode 100644 include/linux/pinctrl/pinctrl-byt.h > > -- _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto