small correction : Link encap for both lowpan and wpan intefaces is UNSPEC.
8 packets are:
41 c8 dd 22 00 ff ff 01 00 00 00 00 00 00 a0 79 4b 00 16 3a 00 05 02 00 00 01 00
8f 00 6f 89 00 00 00 01 04 00 00 00 ff 02 00 00 00 00 00 00 00 00 00 01 ff 00 00
01
[ 56.020564] 41 c8 de 22 00 ff ff 01 00 00 00 00 00 00 a0 79 4b 00 16 3a 00
05 02 00 00 01 00 8f 00 6f 89 00 00 00 01 04 00 00 00 ff 02 00 00 00 00 00 00 00
00 00 01 ff 00 00 01
[ 56.432469] 41 c8 df 22 00 ff ff 01 00 00 00 00 00 00 a0 7b 49 3a 02 01 ff
00 00 01 87 00 da 24 00 00 00 00 fe 80 00 00 00 00 00 00 a2 00 00 00 00 00 00 01
[ 57.433727] 41 c8 e0 22 00 ff ff 01 00 00 00 00 00 00 a0 79 3b 00 16 3a 00
05 02 00 00 01 00 8f 00 d1 06 00 00 00 01 02 00 00 00 ff 02 00 00 00 00 00 00 00
00 00 01 ff 00 00 01
[ 57.440285] 41 c8 e1 22 00 ff ff 01 00 00 00 00 00 00 a0 7b 3b 3a 02 85 00
3a 22 00 00 00 00 01 02 a0 00 00 00 00 00 00 01 00 00 00 00 00 00
[ 58.148429] 41 c8 e2 22 00 ff ff 01 00 00 00 00 00 00 a0 79 3b 00 16 3a 00
05 02 00 00 01 00 8f 00 d1 06 00 00 00 01 02 00 00 00 ff 02 00 00 00 00 00 00 00
00 00 01 ff 00 00 01
[ 61.440460] 41 c8 e3 22 00 ff ff 01 00 00 00 00 00 00 a0 7b 3b 3a 02 85 00
3a 22 00 00 00 00 01 02 a0 00 00 00 00 00 00 01 00 00 00 00 00 00
[ 65.448435] 41 c8 e4 22 00 ff ff 01 00 00 00 00 00 00 a0 7b 3b 3a 02 85 00
3a 22 00 00 00 00 01 02 a0 00 00 00 00 00 00 01 00 00 00 00 00 00
On January 6, 2014 at 3:34 PM Varka Bhadram <var...@cdac.in> wrote:
> hai...
>
> I used the following commands to enable the wpan and lowpan interface...
> # iz add wpan-phy0
> # ip link set wpan0 address a0:0:0:0:0:0:0:1
> # ifconfig wpan0 up
> # iz set wpan0 abcd 8001 11
> # ip link add link wpan0 name lowpan0 type lowpan
> # ip link set lowpan0 address a0:0:0:0:0:0:0:1
> # ip link set lowpan0 up
>
>
> while executing those command 8 packets are going out of the wpan
> interface... What are those packets..?
>
> and also the Link encap for both the packets is UNSPEC.. What is the reason
> for this ?
>
> lowpan0 Link encap:UNSPEC HWaddr
> A0-00-00-00-00-00-00-01-00-00-00-00-00-00-00-00
> inet6 addr: fe80::a200:0:0:1/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1281 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> wpan0 Link encap:UNSPEC HWaddr
> A0-00-00-00-00-00-00-01-00-00-00-00-00-00-00-00
> UP BROADCAST RUNNING NOARP MTU:127 Metric:1
> RX packets:2 errors:0 dropped:0 overruns:0 frame:0
> TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:300
> RX bytes:124 (124.0 B) TX bytes:397 (397.0 B)
> -Bhadram
>
>
> On January 2, 2014 at 3:10 PM Varka Bhadram <var...@cdac.in> wrote:
>
> > > hai..
> >
> > I loaded the driver by using Device Tree Overlay on BeagleBoneBlack. I am
> > able to bind the radio to the IEEE-802.15.4 layer means i successfully
> > register with the ieee802154 layer.
> >
> > Then my question is how to enable the lowpan interface in linux and How to
> > communicate over the IEEE-802.15.4 Sockets...
> >
> > I used linux-zigbee user space tools to enable the interface: I followed
> > the following steps
> >
> >
> > root@beaglebone:~# iz listphy
> > wpan-phy0 IEEE 802.15.4 PHY object
> > page: 0 channel: n/a
> > channels on page 0: 11 12 13 14 15 16 17 18 19
> > 20 21 22 23 24 25 26
> > root@beaglebone:~# iz add wpan-phy0
> > Registered new device ('wpan0') on phy wpan-phy0
> >
> >
> > root@beaglebone:~# ifconfig
> > wpan0 Link encap:UNSPEC HWaddr
> > 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
> > UP BROADCAST RUNNING NOARP MTU:127
> > Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0
> > frame:0
> > TX packets:0 errors:0 dropped:0 overruns:0
> > carrier:0
> > collisions:0 txqueuelen:300
> > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> >
> >
> >
> > regards,
> > Bhadram
> >
> >
> >
> >
> >
> > >
>
-------------------------------------------------------------------------------------------------------------------------------
This e-mail is for the sole use of the intended recipient(s) and may
contain confidential and privileged information. If you are not the
intended recipient, please contact the sender by reply e-mail and destroy
all copies and the original message. Any unauthorized review, use,
disclosure, dissemination, forwarding, printing or copying of this email
is strictly prohibited and appropriate legal action will be taken.
-------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics, you get 100% visibility into your
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
_______________________________________________
Linux-zigbee-devel mailing list
Linux-zigbee-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
