In article <[EMAIL PROTECTED]>, [EMAIL PROTECTED] (Kiss Gabor) writes: > ---------------------------------------------------------------------------- > # smartctl -d ata -F samsung -a /dev/sda > smartctl version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce > Allen > Home page is http://smartmontools.sourceforge.net/ > > === START OF INFORMATION SECTION === > Device Model: SAMSUNG HD160JJ > Serial Number: S08HJ1OL808654 > Firmware Version: ZM100-41 > User Capacity: 160,041,885,696 bytes > Device is: In smartctl database [for details use: -P show] > ATA Version is: 7 > ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a > Local Time is: Tue Jun 12 09:44:59 2007 CEST > > ==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for > details. > > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x02) Offline data collection activity > was completed without error. > Auto Offline Data Collection: Disabled. > Self-test execution status: ( 0) The previous self-test routine > completed > without error or no self-test has ever > been run. > Total time to complete Offline > data collection: (3701) seconds. > Offline data collection > capabilities: (0x5b) SMART execute Offline immediate. > Auto Offline data collection on/off > support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > No Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 1) minutes. > Extended self-test routine > recommended polling time: ( 61) minutes. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED > WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x000f 253 100 051 Pre-fail Always > - 0 > 3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always > - 5632 > 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always > - 886 > 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always > - 0 > 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always > - 0 > 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline > - 0 > 9 Power_On_Hours 0x0032 100 100 000 Old_age Always > - 1301 > 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always > - 0 > 11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always > - 0 > 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always > - 469 > 187 Unknown_Attribute 0x0032 001 001 000 Old_age Always > - 131282 > 190 Unknown_Attribute 0x0022 124 058 000 Old_age Always > - 38 > 194 Temperature_Celsius 0x0022 124 058 000 Old_age Always > - 38 > 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always > - 57898 > 196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always > - 0 > 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always > - 1 > 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline > - 0 > 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always > - 0 > 200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always > - 0 > 201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always > - 0 > 202 TA_Increase_Count 0x0032 253 253 000 Old_age Always > - 0
Az offline teszt utan: === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (3701) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 61) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 5632 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 886 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 11984 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1304 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 469 187 Unknown_Attribute 0x0032 001 001 000 Old_age Always - 131282 190 Unknown_Attribute 0x0022 076 058 000 Old_age Always - 54 194 Temperature_Celsius 0x0022 076 058 000 Old_age Always - 54 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 19582591 196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 202 TA_Increase_Count 0x0032 253 253 000 Old_age Always - 0 -Self-test execution status: ( 0) The previous self-test routine completed - without error or no self-test has ever - been run. +Self-test execution status: ( 121) The previous self-test completed having + the read element of the test failed. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE - 1 Raw_Read_Error_Rate 0x000f 253 100 051 Pre-fail Always - 0 + 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 - 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0 - 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1301 + 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 11984 + 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1304 -190 Unknown_Attribute 0x0022 124 058 000 Old_age Always - 38 -194 Temperature_Celsius 0x0022 124 058 000 Old_age Always - 38 -195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 57898 +190 Unknown_Attribute 0x0022 076 058 000 Old_age Always - 54 +194 Temperature_Celsius 0x0022 076 058 000 Old_age Always - 54 +195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 19582591 -201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always - 0 +201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 Segit ez valamit? Ja es ez is: +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed: read failure 90% 1302 20289144 +# 2 Short offline Completed: read failure 90% 1301 20289144 kissg _________________________________________________ linux lista - linux@mlf.linux.rulez.org http://mlf2.linux.rulez.org/mailman/listinfo/linux