Sziasztok! Adott a tárgybeli eszköz, mellyel 2 db monitort szeretnék vezérelni, (jelenleg) az alábbi beállítások szerint:
Section "Monitor" Identifier "Monitor0" VendorName "LG" ModelName "F920P" Option "DPMS" Option "PreferredMode" "1600x1200_85.00" # LG F920P; GSM4A88; 30.0-111.0; 50.0-160.0 EndSection Section "Monitor" Identifier "Monitor1" VendorName "LG" ModelName "F920P" Option "DPMS" Option "PreferredMode" "1600x1200_85.00" # LG F920P; GSM4A88; 30.0-111.0; 50.0-160.0 Option "RightOf" "Monitor0" EndSection Section "Device" Identifier "Card0" Driver "nouveau" VendorName "nVidia Corporation" BoardName "NV44 [GeForce 6200 TurboCache(TM)]" BusID "PCI:1:0:0" Option "Monitor-DVI-I-1" "Monitor0" Option "Monitor-DVI-I-2" "Monitor1" EndSection Section "Screen" Identifier "Screen0" Device "Card0" #Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1600 1200" "1280 1024" "1024 768" Virtual 3200 1200 EndSubSection EndSection Section "ServerLayout" Identifier "Manual Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "on" EndSection Section "ServerFlags" AllowMouseOpenFail Option "DefaultServerLayout" "Manual Configured" EndSection A dolog nagyjából már működik (napokig szívtam vele, mert korában nem vettem észre, hogy nem az nvidia, hanem a nouveau modul töltődött be "alapból"), a hiba csak annyi, hogy hiába a "PreferredMode" beállítás a Monitor szakaszban, nem tudom a monitort (alapból) 1600x1200:85-ös módba kapcsolni... (Bocsánat a hosszú log-ért, de nem tudom, hogy hol kellene szűkebbre szabnom az idézetet...): ... (**) Option "defaultserverlayout" "Manual Configured" (**) ServerLayout "Manual Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Card0" (==) No monitor specified for screen "Screen0". Using a default monitor configuration. (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "Xinerama" "on" ... (**) Xinerama: enabled ... (--) PCI:*(0:1:0:0) 10de:0161:107d:56c4 nVidia Corporation NV44 [GeForce 6200 TurboCache(TM)] rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072 ... (--) NOUVEAU(0): Chipset: "NVIDIA NV44" (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 (==) NOUVEAU(0): RGB weight 888 (==) NOUVEAU(0): Default visual is TrueColor (==) NOUVEAU(0): Using HW cursor (II) NOUVEAU(0): Output DVI-I-1 using monitor section Monitor0 (**) NOUVEAU(0): Option "PreferredMode" "1600x1200_85.00" (II) NOUVEAU(0): Output DVI-I-2 using monitor section Monitor1 (**) NOUVEAU(0): Option "PreferredMode" "1600x1200_85.00" (**) NOUVEAU(0): Option "RightOf" "Monitor0" (II) NOUVEAU(0): Output TV-1 has no monitor section (II) NOUVEAU(0): EDID for output DVI-I-1 (II) NOUVEAU(0): Manufacturer: GSM Model: 4a88 Serial#: 29898 (II) NOUVEAU(0): Year: 2004 Week: 37 (II) NOUVEAU(0): EDID Version: 1.3 (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 36 vert.: 27 (II) NOUVEAU(0): Gamma: 2.91 (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) NOUVEAU(0): First detailed timing not preferred mode in violation of standard! (II) NOUVEAU(0): redX: 0.631 redY: 0.329 greenX: 0.295 greenY: 0.600 (II) NOUVEAU(0): blueX: 0.144 blueY: 0.071 whiteX: 0.283 whiteY: 0.298 (II) NOUVEAU(0): Supported established timings: ... (II) NOUVEAU(0): 1280x1024@75Hz (II) NOUVEAU(0): Manufacturer's mask: 10 (II) NOUVEAU(0): Supported standard timings: (II) NOUVEAU(0): #0: hsize: 1920 vsize 1440 refresh: 70 vid: 19153 (II) NOUVEAU(0): #1: hsize: 2048 vsize 1536 refresh: 60 vid: 16609 (II) NOUVEAU(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) NOUVEAU(0): #3: hsize: 1280 vsize 1024 refresh: 75 vid: 36737 (II) NOUVEAU(0): #4: hsize: 1280 vsize 1024 refresh: 85 vid: 39297 (II) NOUVEAU(0): #5: hsize: 1600 vsize 1200 refresh: 75 vid: 20393 (II) NOUVEAU(0): #6: hsize: 1600 vsize 1200 refresh: 85 vid: 22953 (II) NOUVEAU(0): #7: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) NOUVEAU(0): Supported detailed timing: (II) NOUVEAU(0): clock: 229.5 MHz Image Size: 350 x 262 mm (II) NOUVEAU(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0 (II) NOUVEAU(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0 (II) NOUVEAU(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 111 kHz, PixClock max 315 MHz (II) NOUVEAU(0): Monitor name: F920P ... (II) NOUVEAU(0): EDID vendor "GSM", prod id 19080 (II) NOUVEAU(0): Using EDID range info for horizontal sync (II) NOUVEAU(0): Using EDID range info for vertical refresh (II) NOUVEAU(0): Printing DDC gathered Modelines: (II) NOUVEAU(0): Modeline "1600x1200"x0.0 229.51 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (106.3 kHz) ... (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) ... (II) NOUVEAU(0): Printing probed modes for output DVI-I-1 (II) NOUVEAU(0): Modeline "1600x1200"x85.0 229.51 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (106.3 kHz) (II) NOUVEAU(0): Modeline "1600x1200"x75.0 205.99 1600 1720 1896 2192 1200 1201 1204 1253 -hsync +vsync (94.0 kHz) (II) NOUVEAU(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz) (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) ... (II) NOUVEAU(0): EDID for output DVI-I-2 ... itt minden sor ugyanaz, mint a "DVI-I-1"-nél ... (II) NOUVEAU(0): EDID for output TV-1 (II) NOUVEAU(0): Output DVI-I-1 connected (II) NOUVEAU(0): Output DVI-I-2 connected (II) NOUVEAU(0): Output TV-1 disconnected (II) NOUVEAU(0): Using user preference for initial modes (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1280x1024 (II) NOUVEAU(0): Output DVI-I-2 using initial mode 1280x1024 (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (--) NOUVEAU(0): Virtual size is 3200x1200 (pitch 3200) (**) NOUVEAU(0): Driver mode "1280x1024": 157.5 MHz (scaled from 0.0 MHz), 91.1 kHz, 85.0 Hz (II) NOUVEAU(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz) (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) ... (**) NOUVEAU(0): Driver mode "1600x1200": 229.5 MHz (scaled from 0.0 MHz), 106.3 kHz, 85.0 Hz (II) NOUVEAU(0): Modeline "1600x1200"x85.0 229.51 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (106.3 kHz) (**) NOUVEAU(0): Mode "1600x1200": 206.0 MHz (scaled from 0.0 MHz), 94.0 kHz, 75.0 Hz (II) NOUVEAU(0): Modeline "1600x1200"x75.0 205.99 1600 1720 1896 2192 1200 1201 1204 1253 -hsync +vsync (94.0 kHz) (**) NOUVEAU(0): Display dimensions: (360, 270) mm (**) NOUVEAU(0): DPI set to (225, 112) ... ... (II) NOUVEAU(0): NVLeaveVT is called. Szóval, azt értem, hogy az 1600*1200:85 nem egy kifejezetten "szabványos" üzemmód, viszont mind a kártya, mind a monitor tudja ezt az üzemmódot, csak én nem tudom az xorg.conf-ban beállítani... a "PreferredMode" piszkálása láthatóan nem hat a dologra... :( Valaki megmondaná, hogy mit kellene megnéznem/javítanom? Vagy tudna adni valaki egy működő (és idevágó) xorg.conf-ot...? Köszönettel: Kis János Tamás _________________________________________________ linux lista - linux@mlf.linux.rulez.org http://mlf2.linux.rulez.org/mailman/listinfo/linux
