http://wki.freespire.org/index/download_freespire That is the site to click dld and the dld dialog says from:http://tracker.linspire.com...
On Sun, 2006-12-10 at 16:49 -0800, Roger Rabbit wrote: > If I had to guess, I'd almost say that you have an iso that's not > freespire. Do you have the link where you're downloading it from? > ************************************ As for the virus question, what > kind of system is this? Is it a business network, or a home network? > What is acting as your local server; (i.e. are you hooked into a > broadband router, or is there an actual computer running the server?) > I'd have to know more about your setup. I didn't get the original email. It is a home network with no router using win xp pro as the one with the modem,and I guess the server. Oh yes the cable is a crossover cable. > ***************************************** Some ISP's lock out email servers that don't belong to them. The > workaround is simply to change the ports, but usually they only block > the outgoing SMTP port, so it's probably not that. Still, you can > check your account settings in Outlook. Default incoming port for pop > is 110. Default outgoing SMTP port is 25. If Outlook lists anything > else, then that would be your answer. That is assuming you are using > POP. Again, I need to know more about your setup, to be of any help > there. > Yep, I is POP. Incoming is port 110 and outgoing is 25. ****************************************** > As for the virus on the D: drive, I'm assuming it's a windows file > system, since you're calling it the D: drive. You could build a boot > cd with bart's PE and install McAfee's command line scanner. It takes > some doing, but it will allow you to access your files for a virus > scan without logging into windows itself. PC Magazine has an article > on this. It can be done on CD or a USB flash drive. > I will have to try this using the cd option. ***************************************** > Boot Disc Article > > http://www.pcmag.com/article2/0,1759,1838134,00.asp > > USB Boot > > http://www.pcmag.com/article2/0,1759,2041234,00.asp > > Once you install Bart, it tells you how to install various items. You > can install McAfee's command line win32 scanner (a separate download > from McAfee), and do a scan that way. Sounds like the way to go. > ******************************** > Of course, the easiest way to me would be to simply open up your case > and disconnect your D: drive from the system by temporarily removing > the cables. You can then low level format your C: drive (choose the > quick option, not full). Every hard drive vendor has a diagnostic > utility on their web site that allows you to do this. Just make sure > you download the correct utility from the correct vendor. If it's a > western digital hard drive, go to western digital's web site to > download the utility. A low level format will basically write 0's to > the first and last million or so sectors. It should erase the boot > sector, and wipe out any infection on your C: drive. That being > said, I have my doubts that this is virus related. Windows viruses > don't typically effect linux, and vice versa. First thing's first. > I'd check your email port settings in outlook, and provide a basic > rundown of your setup. Don't divulge specifics for security reasons. > I just need to know if you're running your own server (linux or > windows), or if you're connected via a router in a home network. My d: is a petition on the only hard drive. This makes it difficult but not impossible. If I find a virus then I will refomat both drives and start from scratch. I will lose my current data and a lot of other stuff, but it is the safest way to go. After the format I will write the d drive to a cd occasionally so I don't lose it again. At the next finding of a virus I can do the same then restore the d: from the cd. I hope I am not confusing you here. I use Norton's ghost to restore /save the system. A friend wrote a little menu program which offers me the needed options and inserts the proper parameters of size, for two cd images needed because of the systems size so I don't have to enter these manually. So far it has worked perfectly. I would like to get him interested in linux as he could potentially contribute some distro changes. I tried to shrink out all the less relevant stuff. I just hope I didn't take out something you need. If I did just ask and I will give you the info. To unsubscribe from this list, please email [EMAIL PROTECTED] & you will be removed. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/LINUX_Newbies/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/LINUX_Newbies/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
