Thanks for your help. Certainly that's not ideal, but it may turn out to be our only option.
Currently I'm investigating using proc_pci_attach_device() at the kernel level to add the device from the driver module init(post-program), but it's not looking promising. Thanks, Jay Miller 781-229-7812x117 Actuality Systems, Inc. [EMAIL PROTECTED] -----Original Message----- From: Ronald G. Minnich [mailto:[EMAIL PROTECTED] Sent: Wednesday, October 06, 2004 12:23 PM To: YhLu Cc: Jay Miller; [EMAIL PROTECTED] Subject: RE: Adding a PCI device that doesn't exist (yet) On Tue, 5 Oct 2004, YhLu wrote: > Can you for the FPGA programming in the auto.c and issue an soft_reset in > auto.c? I think this can work with the current mechanisms. You need to have your chip programmed pre-pci-scan, and the current config mechanism supports that fine. Is this V1 or V2, I forget. ron _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios