Thanks Ty, that's exactly what we're looking for. The de-allocation wouldn't be an issue as we would be re-programming on the reboot anyway.
Did you use the proc_pci_attach_device() mechanism? Cheers, Jay Miller 781-229-7812x117 Actuality Systems, Inc. [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Wednesday, October 06, 2004 1:52 PM To: Jay Miller Cc: Ronald G. Minnich; YhLu; [EMAIL PROTECTED] Subject: Re: Adding a PCI device that doesn't exist (yet) Hopping in mid-thread here so I may have the context wrong: I have succeeded at programming the FPGA to create a PCI device after the boot process. I was then able to have the device driver add the device to the pci device table and get resources allocated for it and get it paired up with the alread loaded device driver. I did not figure out how to de-allocate/de-register such that I could cleanely re-program the FPGA without a re-boot. Is this relevant? Cheers! Ty Jay Miller wrote: > Thanks for your help. Certainly that's not ideal, but it may turn out > to be our only option. > > Currently I'm investigating using proc_pci_attach_device() at the kernel > level to add the device from the driver module init(post-program), but > it's not looking promising. > > Thanks, > > Jay Miller > 781-229-7812x117 > Actuality Systems, Inc. > [EMAIL PROTECTED] > > > -----Original Message----- > From: Ronald G. Minnich [mailto:[EMAIL PROTECTED] > Sent: Wednesday, October 06, 2004 12:23 PM > To: YhLu > Cc: Jay Miller; [EMAIL PROTECTED] > Subject: RE: Adding a PCI device that doesn't exist (yet) > > > > On Tue, 5 Oct 2004, YhLu wrote: > > >>Can you for the FPGA programming in the auto.c and issue an soft_reset > > in > >>auto.c? > > > I think this can work with the current mechanisms. You need to have your > > chip programmed pre-pci-scan, and the current config mechanism supports > that fine. > > > Is this V1 or V2, I forget. > > ron > _______________________________________________ > Linuxbios mailing list > [EMAIL PROTECTED] > http://www.clustermatic.org/mailman/listinfo/linuxbios -- Tyson D Sawyer iRobot Corporation Lead Systems Engineer Government & Industrial Robotics [EMAIL PROTECTED] Robots for the Real World 781-345-0200 ext 3329 http://www.irobot.com _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
