I commit the changes for you. Please check it out from http://snapshots.linuxbios.org/ one hour later. YH From: Sagiv Yefet [mailto:[EMAIL PROTECTED] I have this definition in
targets/tyan/s2850/Config.lb: option CONFIG_CONSOLE_BTEXT=1 Not default as you wrote. Is it ok? Should I had the same thing in
src/mainboard/tyan/s2850/Config.lb? Sagiv. -----Original
Message----- You need to add uses CONFIG_CONSOLE_BTEXT default CONFIG_CONSOLE_BTEXT=1 dir /drivers/ati/ragexl after that you can get ouput in
Linuxbios after vga init. You also need to enable the btext in
Etherboot. You should use Etherboot About kernel, you need to use kernel
patch to enable ragexl frame buffer support. YH From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Sagiv Yefet Hello, I
am using Linux Bios on Tyan 2850. The machine is running with console. I
add to the command line: "console=ttyS0,115200" and I have linux
which runs with console. How can I run with VGA?
Should I add some code to the bios? The
VGA driver is: ATI Rage XL. Sagiv |
- Running with VGA Sagiv Yefet
- RE: Running with VGA Yinghai Lu
- RE: Running with VGA Sagiv Yefet
- RE: Running with VGA YhLu
- RE: Running with VGA Sagiv Yefet
- Re: Running with VGA Stefan Reinauer
- RE: Running with VGA YhLu
- RE: Running with VGA [PMX:#] Ronald G. Minnich
- RE: Running with VGA Sagiv Yefet
- RE: Running with VGA Li-Ta Lo
- RE: Running with VGA YhLu
- RE: Running with VGA Li-Ta Lo
- RE: Running with VGA YhLu
- RE: Running with VGA Li-Ta Lo