I have this definition in targets/tyan/s2850/Config.lb: option
CONFIG_CONSOLE_BTEXT=1 Not default as you wrote. Is it ok? Should I had
the same thing in src/mainboard/tyan/s2850/Config.lb? Sagiv. -----Original Message----- You need to add uses CONFIG_CONSOLE_BTEXT default CONFIG_CONSOLE_BTEXT=1 dir /drivers/ati/ragexl after that you can get ouput in
Linuxbios after vga init. You also need to enable the btext
in Etherboot. You should use Etherboot About kernel, you need to use
kernel patch to enable ragexl frame buffer support. YH From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Sagiv Yefet Hello, I
am using Linux Bios on Tyan 2850. The machine is running with console. I
add to the command line: "console=ttyS0,115200" and I have linux
which runs with console. How can I
run with VGA? Should I add some code to the bios? The
VGA driver is: ATI Rage XL. Sagiv |
- Running with VGA Sagiv Yefet
- RE: Running with VGA Yinghai Lu
- RE: Running with VGA Sagiv Yefet
- RE: Running with VGA YhLu
- RE: Running with VGA Sagiv Yefet
- Re: Running with VGA Stefan Reinauer
- RE: Running with VGA YhLu
- RE: Running with VGA [PMX:#] Ronald G. Minnich
- RE: Running with VGA Sagiv Yefet
- RE: Running with VGA Li-Ta Lo
- RE: Running with VGA YhLu
- RE: Running with VGA Li-Ta Lo
- RE: Running with VGA YhLu