It looks to me as though the 630's "LPC Bridge" device can do what I'm
talking about. If you look at register 46, "INIT Enable Register", it
looks as though you'll get a system reset if you set bits 6,7 to 1.
You can probably test this from userspace using setpci...
Hmmm. Interesting. In the same register there is also an "Enable Keyboard
Hardware Reset" bit. Perhaps you could check using lspci -xxx to see if
that's turned on. Maybe then the stock linux reboot would work.
On Mon, Dec 11, 2000 at 03:52:52PM -0500, Levi Khatskevitch wrote:
> Has anyone done this already for MS7308E?
> - Levi
>
> On Mon, 11 Dec 2000, you wrote:
> > On Mon, Dec 11, 2000 at 02:07:50PM -0500, Levi Khatskevitch wrote:
> > > Hi,
> > > I see that software reset (like 'reboot') doesn't work with linuxbios. Is it a
> > > known issue? Can it theoreticaly be fixed?
> >
> > I found and fixed this problem on my board quite a while back. With some
> > explanation, it shouldn't be too hard for you guys to figure out something
> > that works.
> >
