Hi Stefan, On Tuesday 30 May 2006 12:44, Stefan Reinauer wrote: > * Juergen Beisert <[EMAIL PROTECTED]> [060530 12:33]: > > Kernel image created with: > > > > mkelf-linux --output=/srv/tftpboot/i586Linux > > "--append=earlyprintk=ttyS0,115200,keep console=ttyS0,115200n8" > > --rootdir=/srv/nfsexport/rootfs-i486 --rootmode=rw --ip=dhcp > > /home/jb/Projekte/linux-2.6.16/arch/i386/boot/bzImage > > Uh.. what's mkelf-linux? Try mkelfImage from > ftp://ftp.lnxi.com/pub/mkelfImage
All right, I tried now: mkelfImage --command-line="earlyprintk=ttyS0,115200,keep console=ttyS0,115200n8 root=/srv/nfsexport/rootfs-i486 ip=dhcp rw" --kernel=/home/jb/Projekte/linux-2.6.16/vmlinux --output=/srv/tftpboot/i586Linux The behavior is a _little_ bit different. <many dots snipped> ....done Unknown firmware type: LinuxBIOS Firmware type: PCBIOS But nothing else. What does it mean? BTW: mkelf-linux is from the mknbi-packet that I'm using for other etherboot targets. Juergen -- linuxbios mailing list linuxbios@linuxbios.org http://www.openbios.org/mailman/listinfo/linuxbios