I used a dissambly and there is no jump in the reset vector. I've tried other board (amd rumba, using the same tools JTAG and memory programmer) and it starts normaly the boot process, just don't finish it because the processor is a Geode GX and my board is a LX one. I'll try the norwich board that is similar to mine. The problem I saw with msm800 is that linuxbios.rom is not on a valid format, the file doesn't size like the ROM_SIZE option of targets/../../Config.lb.
Thanks, Otávio On 5/23/07, ron minnich <[EMAIL PROTECTED]> wrote:
The first thing I ever do with problems of this type is simple: hexdump romimage and see if I see a jump at end. ron
-- Otávio Alcântara "I'll never cross to the Dark Side."
-- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
