Dieter Bloms wrote: > Hi, > > On Sat, Jun 16, Stefan Reinauer wrote: > >>> yeah, I got the first readable output from my board. >>> I have configured 9600 Baud in Config.lb and with 19200 in minicom I get >>> these lines: >> >> cool!! What changes were needed? > > I've only set the "default TTYS0_BAUD=57600" in the Options.lb file and > have to set 115200 in minicom to get the right output. > > >
Sounds like the source or input clock is set wrong. Try checking/changing CRF0 for UART A clock source settings. It probably isn't the problem but you could also check CR24 bit 6, 24/48MHz input clock. This is set by a pin on the motherboard but could be wrong or is getting changed? http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83627HF_HGb.pdf Marc -- Marc Jones Senior Software Engineer (970) 226-9684 Office mailto:[EMAIL PROTECTED] http://www.amd.com/embeddedprocessors -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
