On 23.09.2007 22:30, Carl-Daniel Hailfinger wrote:
> Can somebody with the GA-M57SLI v2.0 try the following code snippet and
> post the output? Code may not compile/link etc.
Forget the code in my previous mail. It was simply too late for me to
write working code without a compiler handy.
Try the patch below and post output to the list:
--- util/flashrom/board_enable.c (Revision 2802)
+++ util/flashrom/board_enable.c (Arbeitskopie)
@@ -4,6 +4,7 @@
* Copyright (C) 2005-2007 coresystems GmbH <[EMAIL PROTECTED]>
* Copyright (C) 2006 Uwe Hermann <[EMAIL PROTECTED]>
* Copyright (C) 2007 Luc Verhaegen <[EMAIL PROTECTED]>
+ * Copyright (C) 2007 Carl-Daniel Hailfinger
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -29,6 +30,105 @@
#include <string.h>
#include "flash.h"
+/* Generic Super I/O helper functions */
+uint8_t regval(uint16_t port, uint8_t reg)
+{
+ outb(reg, port);
+ return inb(port + 1);
+}
+
+void regwrite(uint16_t port, uint8_t reg, uint8_t val)
+{
+ outb(reg, port);
+ outb(val, port + 1);
+}
+
+/* Helper functions for most recent ITE IT87xx Super I/O chips */
+#define CHIP_ID_BYTE1_REG 0x20
+#define CHIP_ID_BYTE2_REG 0x21
+#define CHIP_VERSION_REG 0x22
+static void enter_conf_mode_ite(uint16_t port)
+{
+ outb(0x87, port);
+ outb(0x01, port);
+ outb(0x55, port);
+ if (port == 0x2e)
+ outb(0x55, port);
+ else
+ outb(0xaa, port);
+}
+
+static void exit_conf_mode_ite(uint16_t port)
+{
+ regwrite(port, 0x02, 0x02);
+}
+
+static uint16_t find_ite_serial_flash_port(uint16_t port)
+{
+ uint8_t tmp = 0;
+ uint16_t id, flashport = 0;
+
+ enter_conf_mode_ite(port);
+
+ id = regval(port, CHIP_ID_BYTE1_REG) << 8;
+ id |= regval(port, CHIP_ID_BYTE2_REG);
+
+ if (id == 0x8716) {
+ /* LDN 0x0, reg 0x24, mask out lowest bit (suspend) */
+ regwrite(port, 0x07, 0x0);
+ tmp = regval(port, 0x24) & 0xFE;
+ printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
+ 0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis");
+ printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
+ 0x000E0000, 0x000FFFFF, (tmp & 1 << 1) ? "en" : "dis");
+ printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
+ 0xFFEE0000, 0xFFEFFFFF, (tmp & 1 << 2) ? "en" : "dis");
+ printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
+ 0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis");
+ printf("LPC write to serial flash %sabled\n",
+ (tmp & 1 << 4) ? "en" : "dis");
+ printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29);
+ /* LDN 0x7, reg 0x64/0x65 */
+ regwrite(port, 0x07, 0x7);
+ flashport = regval(port, 0x64) << 8;
+ flashport |= regval(port, 0x65);
+ }
+ exit_conf_mode_ite(port);
+ return flashport;
+}
+
+static void it8716_serial_rdid(uint16_t port)
+{
+ uint8_t busy, data0, data1, data2;
+ do {
+ busy = inb(0x0820) & 0x80;
+ } while (busy);
+ /* RDID */
+ outb(0x9f, 0x0820 + 1);
+ /* Start IO, 33MHz, 3 input bytes, 0 output bytes*/
+ outb((0x5<<4)|(0x3<<2)|(0x0), 0x0820);
+ do {
+ busy = inb(0x0820) & 0x80;
+ } while (busy);
+ data0 = inb(0x0820 + 5);
+ data1 = inb(0x0820 + 6);
+ data2 = inb(0x0820 + 7);
+ printf("RDID returned %02x %02x %02x\n", data0, data1, data2);
+ return;
+}
+
+static int gam57sli_probe_serial_flash(const char *name)
+{
+ uint16_t flashport;
+ flashport = find_ite_serial_flash_port(0x2e);
+ if (flashport)
+ it8716_serial_rdid(flashport);
+ flashport = find_ite_serial_flash_port(0x4e);
+ if (flashport)
+ it8716_serial_rdid(flashport);
+ return 0;
+}
+
/*
* Helper functions for many Winbond Super I/Os of the W836xx range.
*/
@@ -314,6 +414,8 @@
};
struct board_pciid_enable board_pciid_enables[] = {
+ {0x10de, 0x0360, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ "gigabyte", "gam57sli", "Gigabyte GA-M57SLI",
gam57sli_probe_serial_flash},
{0x1022, 0x7468, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
"iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise},
{0x1022, 0x746B, 0x1022, 0x36C0, 0x0000, 0x0000, 0x0000, 0x0000,
You have to use the "--mainboard gigabyte:gam57sli" switch for flashrom.
Carl-Daniel
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
