On 18.10.2007 02:28, Carl-Daniel Hailfinger wrote: > On 18.10.2007 02:08, Stefan Reinauer wrote: > >> * Carl-Daniel Hailfinger <[EMAIL PROTECTED]> [071018 01:59]: >> >> >>> My new version is way more generic and hopefully works as well. >>> Can you test and give me an Acked-by: line? >>> >>> >> >> I did not test, but please check this in. We can and will fix and >> improve this later as problems or ideas occur... >> >> > > OK. Harald, please check out the code currently in svn and test if it > works for you. >
And if that works, can you also try the following patch against current svn? Index: spi.c =================================================================== --- spi.c (Revision 2874) +++ spi.c (Arbeitskopie) @@ -270,17 +270,9 @@ generic_spi_write_enable(); /* Send CE (Chip Erase) */ generic_spi_command(1, 0, cmd, NULL); - /* The chip needs some time for erasing, the MX25L4005A has a maximum - * time of 7.5 seconds. - * FIXME: Check the status register instead - * Do we have to check the status register before calling - * write_disable()? The data sheet suggests we don't have to call - * write_disable() at all because WEL is reset automatically. + /* Wait until the Write-In-Progress bit is cleared */ while (generic_spi_read_status_register() & JEDEC_RDSR_BIT_WIP) sleep(1); - */ - generic_spi_write_disable(); - sleep(8); return 0; } @@ -294,17 +286,9 @@ bios[256 * block + i] = buf[256 * block + i]; } outb(0, it8716f_flashport); - /* The chip needs some time for page program, the MX25L4005A has a - * maximum time of 5 ms. - * FIXME: Check the status register instead. - * Do we have to check the status register before calling - * write_disable()? The data sheet suggests we don't have to call - * write_disable() at all because WEL is reset automatically. + /* Wait until the Write-In-Progress bit is cleared */ while (generic_spi_read_status_register() & JEDEC_RDSR_BIT_WIP) usleep(1000); - */ - generic_spi_write_disable(); - usleep(5000); } void generic_spi_page_program(int block, uint8_t *buf, uint8_t *bios) -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios