* Uwe Hermann <[EMAIL PROTECTED]> [071014 19:10]:
> See patch.
> This patch should also fix the broken abuild-run on this board...
>
> Thanks, Uwe.
> Some fixes for the BCOM WinNET100, mostly in Config.lb:
>
> - Add missing entry for the NIC:
>
> device pci 0f.0 on end # Ethernet (onboard)
>
> - Drop the following lines:
>
> register "com1" = "{115200}"
> register "com2" = "{38400}"
>
> Those entries hardcode the BAUD rate (as far as I can tell, please
> correct me if I'm wrong). We don't want that -- instead the config option
> TTYS0_BAUD in Options.lb should be used(?) I verified that dropping those
> lines will not break serial output (COM1, 115200, 8n1).
>
> - Enable IDE (PCI device 00:12.2) and add the following register lines
> to tell the CS5530 code to actually enable IDE channel 0:
>
> register "ide0_enable" = "1"
> register "ide1_enable" = "0" # Not available/needed on this board
>
> Tested with a 2.5" hard drive and FILO, works fine.
>
> - Enable USB (PCI device 00:13.0), not sure why it was commented.
>
> - Enable COM2 as it's used by the smartcard reader.
>
> - Add CONFIG_COMPRESSED_PAYLOAD_LZMA to Options.lb, in order to fix
> abuild for this board.
>
> - Add some more comments.
>
> Signed-off-by: Uwe Hermann <[EMAIL PROTECTED]>
Acked-by: Stefan Reinauer <[EMAIL PROTECTED]>
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: [EMAIL PROTECTED] • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
