On Tue, Oct 23, 2007 at 02:02:14PM +0200, Stefan Reinauer wrote:
> * Uwe Hermann <[EMAIL PROTECTED]> [071014 19:10]:
> > See patch.
>
> > This patch should also fix the broken abuild-run on this board...
> >
> > Thanks, Uwe.
>
> > Some fixes for the BCOM WinNET100, mostly in Config.lb:
> >
> > - Add missing entry for the NIC:
> >
> > device pci 0f.0 on end # Ethernet (onboard)
> >
> > - Drop the following lines:
> >
> > register "com1" = "{115200}"
> > register "com2" = "{38400}"
> >
> > Those entries hardcode the BAUD rate (as far as I can tell, please
> > correct me if I'm wrong). We don't want that -- instead the config option
> > TTYS0_BAUD in Options.lb should be used(?) I verified that dropping those
> > lines will not break serial output (COM1, 115200, 8n1).
> >
> > - Enable IDE (PCI device 00:12.2) and add the following register lines
> > to tell the CS5530 code to actually enable IDE channel 0:
> >
> > register "ide0_enable" = "1"
> > register "ide1_enable" = "0" # Not available/needed on this board
> >
> > Tested with a 2.5" hard drive and FILO, works fine.
> >
> > - Enable USB (PCI device 00:13.0), not sure why it was commented.
> >
> > - Enable COM2 as it's used by the smartcard reader.
> >
> > - Add CONFIG_COMPRESSED_PAYLOAD_LZMA to Options.lb, in order to fix
> > abuild for this board.
> >
> > - Add some more comments.
> >
> > Signed-off-by: Uwe Hermann <[EMAIL PROTECTED]>
>
> Acked-by: Stefan Reinauer <[EMAIL PROTECTED]>Thanks, r2896. Uwe. -- http://www.hermann-uwe.de | http://www.holsham-traders.de http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
signature.asc
Description: Digital signature
-- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
