On Tue, 18 Sep 2001, Jake Page wrote: > Basically, it looks like it's reading from the middle of the ROM instead > of the beginning. Is there anything I have to do to the MS7308E/Sis 630 > to get it to "recognize"/map the whole 512k ROM? This either means it is misprogrammed or you did not set the bits in the bridge to allow 256KB addressing. However, I know linuxbios sets those bits. I think it is misprogrammed. you can try this: boot normal bios, put your flash in, dump it and see if it looks right. Sorry I haven't tried this as it has been a VERY long time since we used FLASH on any MS7308E boards. ron
- elf boot kernel from 512k flash part? Jake Page
- Re: elf boot kernel from 512k flash part? Eric W. Biederman
- Re: elf boot kernel from 512k flash part? Ronald G Minnich
- Re: elf boot kernel from 512k flash part? Jake Page
- Re: elf boot kernel from 512k flash part? Eric W. Biederman
- Re: elf boot kernel from 512k flash part? Ronald G Minnich
- Re: elf boot kernel from 512k flash part? Jake Page
- Re: elf boot kernel from 512k flash part? Ronald G Minnich
- Re: elf boot kernel from 512k flash part? Eric W. Biederman
- Re: elf boot kernel from 512k flash part? Ollie Lho
- Re: elf boot kernel from 512k flash part? Eric W. Biederman
- Re: elf boot kernel from 512k flash part? Ronald G Minnich
- Re: elf boot kernel from 512k flash part? Ronald G Minnich
- Re: elf boot kernel from 512k flash part? Ronald G Minnich
- Re: elf boot kernel from 512k flash part? David Woodhouse
- Re: elf boot kernel from 512k flash part? Eric Seppanen
- Re: elf boot kernel from 512k flash part? Richard A. Smith
- Re: elf boot kernel from 512k flash part? Jake Page
