Ronald G Minnich <[EMAIL PROTECTED]> wrote:
> I'm doing a (I hope) quick port to the Lippert cool roadrunner II. This is
> the only geode I have been able to buy so far. Should be pretty easy
> thanks to Christer Weinigel's fine work. The only new wrinkle is I need to
> add support for the SMC 37b72x part.
Note that the Geode GX1+CS5530 that's on the Lippert card is quite a
different beast from the SC2200. The GX1 CPU core is mostly the same,
so the code that has to do with GX_BASE, the 0x22/0x23 config
registers the PCI functions and the RAM sizing should work with minor
modifications. Any code using the SuperIO or the Config Base
Registers will need to be modified.
National have made the data sheets for the GX1 processor and the
CS5530 companion chip available at:
http://www.national.com/ds/GX/
http://www.national.com/ds/CS/
/Christer
--
"Just how much can I get away with and still go to heaven?"
