Tao Liu <[EMAIL PROTECTED]> writes: > Hello, > > This patch handles the phy reset pin's polarity. AMD8111's PHY_RESET pin > is active high by default, but some PHY requires active low reset signal. > On mainboards which use 8111's PHY_RESET pin to reset PHY the bios > must select the correct PHY_RST_POL for 8111, otherwise the PHY chip > would always be held in reset state and can't be accessed by software. > > I sent a similar patch several months ago but no response on this list, > would someone who has cvs commit right check and apply it?
Thanks, committed. Eric _______________________________________________ LinuxBIOS mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
