It was there, and after comment out buffer checking in raminit.c, it could work with one DIMM installed.
the ck804 pro should be superset of ultra. YH On 8/16/05, Jeremy Jackson <[EMAIL PROTECTED]> wrote: > yhlu wrote: > > >S2865 support athlon64 instead of Opteron. > > > >athlon64 doesn't support ECC. > > > >I have tried to comment out lines in raminit.c and could boot the > >system with LinuxBIOS. > > > >the problem are > >1. it only supports one DIMM ...? > >2. Etherboot support 5721 may still have problem, Tim already put sth > >to support 5721 in Etherboot but have no time to verify that. > > > >YH > > > > > I would be very interested to know if this board will become supported > soon. I know nVidia can be difficult to deal with. In particular I > would like to use this board with Linuxbios and boot from SATA. > > I am also confused by the chipset name - nForce4 Ultra - is that the > same as CK8-04? > > Regards, > > Jeremy > -- LinuxBIOS mailing list LinuxBIOS@openbios.org http://www.openbios.org/mailman/listinfo/linuxbios